Railway Preservation News http://www.rypn.org/forums/ |
|
Lima was going to build a 4-8-6? http://www.rypn.org/forums/viewtopic.php?f=1&t=32900 |
Page 2 of 2 |
Author: | Dave Stephenson [ Sun Feb 19, 2012 4:29 pm ] |
Post subject: | Re: Lima was going to build a 4-8-6? |
I should have thought of Karen Parker's site earlier. She's pretty creative with what-if photos and drawings. Thanks for locating it! |
Author: | J3a-614 [ Sun Feb 19, 2012 6:37 pm ] |
Post subject: | Re: Lima was going to build a 4-8-6? |
At the considerable risk of having this thread go crazy, it seems appropriate to bring up that the New York Central was considering at some point a duplex drive variant of the Niagara, to be in class C1a: http://www.railroad.net/forums/viewtopi ... 93&t=75097 Ducking under the desk. . . |
Author: | J3a-614 [ Mon Feb 20, 2012 8:41 pm ] |
Post subject: | Re: Lima was going to build a 4-8-6? |
Oh my, I knew it was a possibility the thread would go crazy, but I didn't expect this. . . Actually, it's surprising how plausible some of these "fantasy" engines are. With the exceptions of the PRR T-1 as a Garratt, the Erie Quadruplex, the NYC 4-8-4 and the proposed C1a 4-4-4-4 styled for the 20th Century Limited of 1938, and one or two others, most of these machines could have existed, or nearly so. One--the Reading 2-10-4--would have been an alternative to the T-1 4-8-4 (in other words, if Reading had opted for this one, there would be no T-1s). Most intriguing to my eyes are the NYC "3600" 2-10-2s (a good looker for a 2-10-2) and the A-2a 2-8-4s (only changes for that one are Box Pok drivers and a booster). Then there was that third-generation "J-4" Hudson, supposedly based on the NYC S-1 and S-2, which is big enough to remind me of C&O's L-2 and L-2a 4-6-4s. http://en.wikipedia.org/wiki/Chesapeake ... _and_L-2-A http://members.pioneer.net/~fitzrr/303.jpg http://lewrail.rrpicturearchives.net/sh ... id=2379398 Also of great interest are the copies of publications that are also on this site; among them are a partial copy of a Baker valve gear parts catalog and a course on locomotive firing: http://www.railarchive.net/bakervalve/partscat.htm http://www.railarchive.net/firing/index.html Again, we must be grateful to the people with the passion to collect and share this material via the internet. |
Author: | whodom [ Wed Feb 22, 2012 4:18 pm ] |
Post subject: | Re: Lima was going to build a 4-8-6? |
I submit that this site puts all others to shame on the subject of crazy fictional steam locomotives: http://www.kropplenburg.de/rsr/pages/ModernExp.html Here's a pic of one example: This guy really takes the cake for imaginative steam. |
Author: | wilkinsd [ Wed Feb 22, 2012 5:01 pm ] |
Post subject: | Re: Lima was going to build a 4-8-6? |
Do the German designs use the Tross stay bolt, or have the mud troughs? (runs and ducks for cover) |
Author: | whodom [ Wed Feb 22, 2012 5:21 pm ] |
Post subject: | Re: Lima was going to build a 4-8-6? |
wilkinsd wrote: Do the German designs use the Tross stay bolt, or have the mud troughs? (runs and ducks for cover) http://instantrimshot.com/index.php?sound=rimshot&play=true |
Author: | Artur Gorote [ Fri Jun 20, 2014 7:09 pm ] | ||
Post subject: | Re: Lima was going to build a 4-8-6? | ||
Just like to say thank you to Hugh (whodom) for his kind compliments of Feb 22, 2012. I only discovered rypn the other day by chance after Googling "Kropplenburg." Regards Artur
|
Page 2 of 2 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |