Railway Preservation News
http://www.rypn.org/forums/

Update from the DT&M Roundhouse
http://www.rypn.org/forums/viewtopic.php?f=1&t=33511
Page 1 of 2

Author:  Matthew Goodman [ Fri Jun 29, 2012 6:18 pm ]
Post subject:  Update from the DT&M Roundhouse

We have made some progress here at the Henry Ford, our Detroit & Lima Northern 4-4-0 is having a new tender frame constructed here in our shop.

Image

The center sill starts to take shape as it is riveted together.

Image

Image

Image

The rest of the frame is assembled on stands.

Image

The frame sitting on it's rebuilt trucks after coming back from paint.

Image

Installing the deck boards. Soon the tank will be set on the frame, more to come...

Image

Author:  mldeets [ Fri Jun 29, 2012 6:41 pm ]
Post subject:  Re: Update from the DT&M Roundhouse

Beautiful work , Matt! Glad to see you keep it going.....mld

Author:  Stephen Hussar [ Fri Jun 29, 2012 9:04 pm ]
Post subject:  Re: Update from the DT&M Roundhouse

Terrific photos too, thanks for posting!

Stephen

Author:  J3a-614 [ Fri Jun 29, 2012 9:18 pm ]
Post subject:  Re: Update from the DT&M Roundhouse

Is it done yet?

Is it done yet?

Is it done yet?

Sorry, I couldn't help myself.

It's hard not to get excited at seeing such beautiful work. . .

Did some checking to see what else might be out there, and came across these YouTube clips. Have fun, in particular remembering how hot it must have been to be doing that riveting work on the mud ring a while back:

http://www.youtube.com/watch?v=agCQ6YiVxuY

http://www.youtube.com/watch?v=pNoB_pRNO9c

As things looked about a month ago:

http://www.youtube.com/watch?v=t52xFCZgEWs

That same fellow was also interested in your "Gibson Girl" 4-4-2; oh, how nice this lady would look in steam (even if I know it's extremely unlikely)! It's also interesting how delicate and lacy this engine seems to be, even when viewed from the pit:

http://www.youtube.com/watch?feature=en ... 32lOsgEr5I

Have fun.

Author:  jasonsobczynski [ Sun Jul 01, 2012 10:50 pm ]
Post subject:  Re: Update from the DT&M Roundhouse

The term "hell for stout" comes to mind! I have never seen a tender of that modest size of such heavy cross section steel! Between the center sill and the bolsters, WOW! That thing should last about 4.95 lifetimes....

Cheers, Jason

Author:  Mgoldman [ Sun Jul 01, 2012 11:30 pm ]
Post subject:  Re: Update from the DT&M Roundhouse

Congratulations! Keep up the... well, you know!

A bit more information and photos can be found at Steamlocomotive.info:

http://www.steamlocomotive.info/vlocomo ... isplay=636

From "Notes":

Posted: 2012-06-14 10:22:45.897 by Keven Lewis
Greenfield Village currently expect repairs & inspection place to be complete late 2012, with use on Greenfield Village Weiser Railway in 2013.

Posted: 2009-05-31 21:33:29.477 by Troy
The Detroit Lima became the DT&I. I live along the old DT&I mainline. The tracks are still there.

Posted: 2008-06-18 06:05:09.533 by Isaac P.
Over the 2007-2008 winter the cab was removed and the firebox was completely repaired. It's the only progress I've seen. It's a spare time project.

Posted: 2006-03-04 22:38:51.223 by John Rahrig
1897 Detroit & Lima Northern Baldwin 4-4-0 No. 7 - This Baldwin locomotive was originally operated in passenger service by the Detroit & Lima Northern Railway that was bought later by the Detroit, Toledo & Ironton Railroad. This was also Henry Ford’s favorite locomotive and was use when he needed to go someplace by rail. It is currently being restored to full operation service.

/Mitch

Author:  j32885 [ Thu Aug 30, 2012 12:59 am ]
Post subject:  Re: Update from the DT&M Roundhouse

Thanks J3a-614 for posting my videos! ^_^

Was going to put them in the other recent threads that you mention recently.

Early NS Steam Program Footage, Bill Purdie, Jim Bistline...
viewtopic.php?f=1&t=33803

Update from the DT&M Roundhouse (2nd Recent)
viewtopic.php?f=1&t=32229

Haven't gotten back over the GVRR & DT&M Roundhouse since Memorial Day. I always keep hearing steam whistles from my home and workplace.

Author:  Tower Operator [ Thu Aug 30, 2012 1:32 am ]
Post subject:  Re: Update from the DT&M Roundhouse

NICE JOB on the tender! Looks terrific!!

Author:  Les Beckman [ Thu Aug 30, 2012 3:45 pm ]
Post subject:  Re: Update from the DT&M Roundhouse

Had a nice tour of the DT&M roundhouse earlier this month. Enjoyed finally meeting Mr. Goodman, Mr. Salmonson, Mr. Farmer in person. They do great work.

One thing I noticed on a short siding off of the railroad behind a fence near the statue of Thomas Edison, was an old very rusty boxcar. Looked like a 50 footer with outside braces, except steel panels instead of wood. One end had doors. Trucks marked UP. It was explained to me that this is a car that Ford shipped Model T's in. If so, a rare car to be sure. The railroad has some nicely restored freight equipment. Any timeframe on attempting a restoration of this historic boxcar?

Les

Author:  Chris Salmonson [ Tue Oct 16, 2012 7:37 pm ]
Post subject:  "New" Cotton Belt Blue Streak Boxcar

Image

Image

Image

The final PS-1 box car to be painted at Greenfield Village is St Louis Southwestern 35850. This car was painted with stencils I cut by hand (except for the small 3" and less letters). No vinyl was used in this paint job. This car was never a Cotton Belt boxcar (actually it is ex C&O 19385), but it adds variety to rolling stock at Greenfield Village. The use of the Cotton Belt herald has been cleared by Union Pacific. This is now the second piece of Cotton Belt rolling stock on display at The Henry Ford.

Author:  Les Beckman [ Tue Oct 16, 2012 8:35 pm ]
Post subject:  Re: Update from the DT&M Roundhouse

Chris -

Congrats! Beautifully done! You are REALLY talented! Feel free to come down to Hoosier Valley Railroad Museum anytime and letter Chesapeake & Ohio on a genuine C&O boxcar. Oh, did I mention? Bring the genuine C&O boxcar with you.

Les (HVRM/North Judson, Indiana)

Author:  Howard P. [ Wed Oct 17, 2012 2:44 pm ]
Post subject:  Re: Update from the DT&M Roundhouse

THAT is a GREAT job. Especially the way that the original technique of the large stencil with "wires" was duplicated--- it had a very distinctive look that you captured perfectly.

Howard P.
(fellow freight-car freak)

Author:  Chris Salmonson [ Fri Oct 19, 2012 1:48 pm ]
Post subject:  Re: Update from the DT&M Roundhouse

Les, the box car you mentioned is a 50' Union Pacific Automobile car. It arrived at Greenfield Village in the late 80s from Stickney, IL via flat car. We tried to find reporting marks, but couldn't find any. There was none visible in the snapshots taken in Illinois when it was sitting outside a power plant. This box car will be worked on at some point. It's definitely a very interesting piece of rolling stock.

Attachments:
up_auto.JPG
up_auto.JPG [ 229.05 KiB | Viewed 4281 times ]

Author:  Dennis Storzek [ Fri Oct 19, 2012 3:25 pm ]
Post subject:  Re: Update from the DT&M Roundhouse

Those are really interesting cars, very early for all steel cars. also very early for automobile cars of that large size. The design dates to 1915 IIRC, and these cars were written up in both Railway Mechanical Engineer and Railway Review several times.

These car pre-date the Evens style racks by at least a decade, but were set up for double deck loading just the same. Those square forgings you see half way up the side sheets make pockets to hold the ends of wood dunnage that supports the top layer. Somewhere I've been told there exists a photo showing Model T's being loaded in this fashion, with the wheels removed from the top layer, their axle ends resting directly on the dunnage. The wheels to the top layer were packed in around the bottom layer of cars.

At least one group of these cars was equipped with a rail on the cieling to accommodate a rolling hoist for loading engines.

Author:  Les Beckman [ Mon Nov 26, 2012 12:39 pm ]
Post subject:  Re: Update from the DT&M Roundhouse

Chris Salmonson wrote:
Les, the box car you mentioned is a 50' Union Pacific Automobile car. It arrived at Greenfield Village in the late 80s from Stickney, IL via flat car. We tried to find reporting marks, but couldn't find any. There was none visible in the snapshots taken in Illinois when it was sitting outside a power plant. This box car will be worked on at some point. It's definitely a very interesting piece of rolling stock.


Chris -

Thanks for the photo. I was going through some photos that Mike Pannell referenced on another thread here on RyPN, and found a non-included photo of his of a car that might be a sister to this one. Nice thing is that the lettering appears readable, which might help you guys when you reletter the car after restoration. I am hoping Mike might send the photos of that car which are taken from the other (non-door) end.

Les

Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/