Railway Preservation News
http://www.rypn.org/forums/

Schutte & koerting injector question
http://www.rypn.org/forums/viewtopic.php?f=1&t=36310
Page 1 of 1

Author:  CCDW [ Wed Mar 05, 2014 2:22 pm ]
Post subject:  Schutte & koerting injector question

Does anyone have a Schutte and Koerting Injector patent 1888 with 1-1/4" lines in and out? I am putting one together and the link to the starting lever has been broken and repaired badly. The length is in question. Would someone please measure the center to center length of that part? It would be part #4. I should be exceedingly grateful.
Chris De Witt

Attachments:
Schutte&Korting link.jpg
Schutte&Korting link.jpg [ 11.86 KiB | Viewed 1617 times ]

Author:  Kelly Anderson [ Thu Mar 06, 2014 8:46 am ]
Post subject:  Re: Schutte & koerting injector question

I contacted my connection for all things Schutte & Koerting, and while he said that he didn’t have a 1-1/4” in his collection, he recalled that Clarks trading Post in New Hampshire does, mounted on their engine house wall. You might contact them.

Author:  CCDW [ Thu Mar 06, 2014 3:20 pm ]
Post subject:  Re: Schutte & koerting injector question

Thank you. I will do so.

Author:  Kelly Anderson [ Tue Mar 11, 2014 5:08 pm ]
Post subject:  Re: Schutte & koerting injector question

My connection sent these two photos of one of his ½” S&K injectors on the off chance that the angle of the handle in both open and closed positions would be of assistance to you.

Image

Image

Author:  CCDW [ Tue Mar 11, 2014 7:20 pm ]
Post subject:  Re: Schutte & koerting injector question

Thank you for the help.

CCdW

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/