Railway Preservation News
http://www.rypn.org/forums/

New build narrow gauge Baldwin 2-4-2T
http://www.rypn.org/forums/viewtopic.php?f=1&t=39663
Page 2 of 2

Author:  10stewi [ Wed Sep 13, 2017 9:44 pm ]
Post subject:  Re: New build narrow gauge Baldwin 2-4-2T

Having met and discussed the Beach Head project with one of its leaders, his words came to be summarized as such; We weld fabricated the cylinders because at the time it was thought casting the cylinders would be cost prohibitive and too complex. Now that there are many new build projects, heritage locomotives repairs with new cylinders, and the pattern making technology has advanced to one off 3D foam prints, I wish we had just waited a bit longer and gone with the casting process. Its cheaper that way now and avoids all the thought about welded assembly and tricky issues with warping -Fred Bailey. I cannot remember every word he said to place it as a quote, but this is as close as I can remember the two year old discussion.

A good example of that last bit he said can be seen in the build log for Lyn (topic locomotive) around the time they got to machining the welded assemblies. If I recall correctly, one side was incredibly close to too small due to warping and miscalculations in material placement/length.

Take what 2 cents you find in his words, each project can benefit or find drawbacks in either method of production.

Author:  70000 [ Thu Sep 28, 2017 10:18 am ]
Post subject:  Re: New build narrow gauge Baldwin 2-4-2T

Film off Youtube of it on test - shame about the microphone wind noise...

https://www.youtube.com/watch?v=4h-jfezZpko

Author:  PMC [ Thu Mar 07, 2024 9:50 pm ]
Post subject:  Re: New build narrow gauge Baldwin 2-4-2T

marshall5 wrote:
The new-build Atlantic loco 'Beachy Head' at the Bluebell Railway (UK) also has fabricated cylinders and should be running sometime late next year or early 2019. Some years ago when B.R. Standard Mogul 76079 on the North Yorks Moors Rly cracked a cylinder a replacement was fabricated but never used - due to distortion IIRC. Instead a traditional cast one was made and fitted. Several locos in the U.K. (not all new-builds) have received new cylinders in recent years using castings from both traditional wooden patterns and the new 'disposable' poly-patterns.
Ray.

A bit delayed but finally its debut connected to its tender. Finishing work is still in progress, it looks to me as though parts are missing on the steam dome but I will defer to the experts. I will also defer to the experts as to whether this locomotive is practical or sexy, as per the recent discussion of new-build power. As was noted on facebook, there are now 30 new-build steam locomotives either in service or under construction in the UK: https://www.facebook.com/bluebellrailwa ... xGyJmi9dBl
"Bluebell Railway

'Beachy Head' Emerges!
A historic day for everyone at The Bluebell Railway. New build Marsh Atlantic No. 32424 'Beachy Head' was transported from its shed at Sheffield Park yesterday afternoon and was partnered with its tender for the very first time this morning.
This is an incredible achievement by the Atlantic House team and everyone involved with this fantastic project. The reality of seeing an LBSCR Marsh Atlantic is very much reaching the final stages.
The locomotive has now been moved into the maintenance shed where the commissioning work will now commence to bring 'Beachy Head' into service.
Here are a couple of photos of both yesterday and today, showing 'Beachy Head' at Sheffield Park."

Attachments:
429773100_798734645625955_5810582067701350753_nb.jpg
429773100_798734645625955_5810582067701350753_nb.jpg [ 127.47 KiB | Viewed 492 times ]
430039811_798734678959285_710951080009623709_nc.jpg
430039811_798734678959285_710951080009623709_nc.jpg [ 157.49 KiB | Viewed 492 times ]

Page 2 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/