It is currently Thu Mar 28, 2024 5:15 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Auspicious Anniversary: First US Coal Burning Locomotive
PostPosted: Mon Feb 19, 2024 3:12 pm 

Joined: Sun Aug 22, 2004 11:54 pm
Posts: 2367
Courtesy of the Cassel mailing list:

The first practical US coal-burning locomotive made its' first trial run in Pennsylvania - 19 February 1831

Unfortunately, it would later kill its inventor

In 1831, the York locomotive made its first trial run. Though it was not the first to be invented, it was in service for several years, and is regarded as the first practical coal-burning locomotive built in America. It was designed with a vertical boiler by Phineas Davis for the B&O Railroad competition for inventors, which it won, and was adopted by the B&O. The name comes from York, Pennsylvania, where it was built and tested. It was the first locomotive constructed with coupled wheels and two pairs of drivers. The wheels were 30 inches diameter, and the engine weight was 3½ tons. On 27 September 1835, while on an excursion for employees, Phineas Davis, was on board the locomotive observing its operation when the train derailed due to defective track, and Davis died in the accident.


Offline
 Profile  
 
 Post subject: Re: Auspicious Anniversary: First US Coal Burning Locomotive
PostPosted: Mon Feb 19, 2024 7:07 pm 

Joined: Tue Sep 14, 2004 7:52 am
Posts: 2561
Location: Strasburg, PA
superheater wrote:
Phineas Davis, was on board the locomotive observing its operation when the train derailed due to defective track, and Davis died in the accident.
I wonder what the anniversary is for the first locomotive with modern equalizing...


Offline
 Profile  
 
 Post subject: Re: Auspicious Anniversary: First US Coal Burning Locomotive
PostPosted: Mon Feb 19, 2024 9:07 pm 

Joined: Thu May 24, 2012 1:37 pm
Posts: 2213
Gowan and Marx -- equalized driving wheelbase further three-point equalized with a four-wheel leading truck. 1839.

_________________
R.M.Ellsworth


Offline
 Profile  
 
 Post subject: Re: Auspicious Anniversary: First US Coal Burning Locomotive
PostPosted: Mon Feb 19, 2024 9:14 pm 

Joined: Tue Sep 14, 2004 7:52 am
Posts: 2561
Location: Strasburg, PA
But what day?


Offline
 Profile  
 
 Post subject: Re: Auspicious Anniversary: First US Coal Burning Locomotive
PostPosted: Mon Feb 19, 2024 10:27 pm 

Joined: Thu May 24, 2012 1:37 pm
Posts: 2213
Eastwick's original patent was November 20, 1837, but it was not fully practicable in that form. Harrison's patent is more workable, April 20 1838.

Unfortunately I do not know the time at which the Patent Office granted these.

_________________
R.M.Ellsworth


Offline
 Profile  
 
 Post subject: Re: Auspicious Anniversary: First US Coal Burning Locomotive
PostPosted: Tue Feb 20, 2024 11:42 pm 

Joined: Sun Aug 22, 2004 11:54 pm
Posts: 2367
What if the track defect was a snake. Wouldn't that be a problem even if there was equalizing gear.


Offline
 Profile  
 
 Post subject: Re: Auspicious Anniversary: First US Coal Burning Locomotive
PostPosted: Wed Feb 21, 2024 8:10 am 

Joined: Sun Aug 22, 2004 7:19 am
Posts: 6399
Location: southeastern USA
There was an interesting documentary about early coal burning steam made in the silent era called OUR HOSPITALITY. Worth a look.

_________________
“God, the beautiful racket of it all: the sighing and hissing, the rattle and clack of the cars over the rails. These were the sounds that made America the greatest country on earth." Jonathan Evison


Offline
 Profile  
 
 Post subject: Re: Auspicious Anniversary: First US Coal Burning Locomotive
PostPosted: Wed Feb 21, 2024 7:04 pm 

Joined: Thu May 24, 2012 1:37 pm
Posts: 2213
Quote:
"What if the track defect was a snake. Wouldn't that be a problem even if there was equalizing gear."
I presume you mean a 'snakehead', lifting of a strap rail far enough that a wheel 'picks' it.

Not an issue for equalization in weight distribution, and less likely that drivers will strip it: it will either be picked at the lead axle, or by one of the coaches following (where its chief danger is penetrating and disrupting the relatively lightweight wood construction -- it doesn't help if the trucks use something like those Winans antifriction axles with thin little 'journals' and no provision for wheel braking.

_________________
R.M.Ellsworth


Offline
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours [ DST ]


 Who is online

Users browsing this forum: conopt_rail, Google [Bot] and 96 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: