Railway Preservation News
http://www.rypn.org/forums/

WABCO 6E DISTRIBUTING VALVE
http://www.rypn.org/forums/viewtopic.php?f=1&t=43552
Page 1 of 1

Author:  Bowmore [ Fri Jul 19, 2019 9:15 pm ]
Post subject:  WABCO 6E DISTRIBUTING VALVE

I need a manual or some other information on how this works. Thanking you in advance.

Author:  Bob Milhaupt steamy [ Fri Jul 19, 2019 9:29 pm ]
Post subject:  Re: WABCO 6E DISTRIBUTING VALVE

Try this ICS document for 6ET and 8ET equipment:

https://icsarchive.org/icsarchive-org/b ... ment_1.pdf

Discussion of the 6-E distributing valve begins on page 7 (PDF page 8).

Regards,
Bob Milhaupt

Author:  Bowmore [ Sat Jul 20, 2019 9:59 am ]
Post subject:  Re: WABCO 6E DISTRIBUTING VALVE

Bob, Thank you so much for the information. I knew I could count on someone at RYPN to help..

I have worked out what all the electrical stuff on the 23 tonner does, but air was a mystery to me.
The original 14 E dual valve has been replaced by an SA-2 and SA-9 valve.
When I visited the Kilohana plantation on Kauai, it appears they did the same thing with their engine.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/