It is currently Fri Jan 15, 2021 11:23 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 11 posts ] 
Author Message
 Post subject: Interesting "Critter" Spotted At Enola Yard
PostPosted: Wed Jun 10, 2020 12:45 am 

Joined: Fri Feb 12, 2010 7:52 pm
Posts: 103
Hello All. I'm looking for any information you can offer regarding what exactly this thing is and any history, stories, etc. A friend of mine spotted it yesterday, stored in a building at Enola Yard in Harrisburg. Thanks in advance!


Attachments:
Resized_20200608_174614.jpeg
Resized_20200608_174614.jpeg [ 27.38 KiB | Viewed 3534 times ]
Resized_20200608_175025.jpeg
Resized_20200608_175025.jpeg [ 26.65 KiB | Viewed 3534 times ]
Offline
 Profile  
 
 Post subject: Re: Interesting "Critter" Spotted At Enola Yard
PostPosted: Wed Jun 10, 2020 12:46 am 

Joined: Fri Feb 12, 2010 7:52 pm
Posts: 103
One more shot of it....


Attachments:
2.jpeg
2.jpeg [ 30.25 KiB | Viewed 3533 times ]
Offline
 Profile  
 
 Post subject: Re: Interesting "Critter" Spotted At Enola Yard
PostPosted: Wed Jun 10, 2020 2:17 am 

Joined: Mon Jul 02, 2018 8:04 pm
Posts: 256
It has vents at the top and it has stenciling talking about charging. It looks like a portable battery supply for jumping starting dead locomotives. Not a bad idea. We used to have a couple of batteries on a pallet and drove the forklift to the locomotive to jump start dead locomotives. The portable battery supply as seen in the photo would be very helpful if you had a lot of dead locomotives in a siding that needed to be started. As long as you had a empty track next to it start one and move on to the next.


Offline
 Profile  
 
 Post subject: Re: Interesting "Critter" Spotted At Enola Yard
PostPosted: Wed Jun 10, 2020 3:23 am 

Joined: Wed Nov 23, 2016 7:05 pm
Posts: 237
It's the shop switcher. Battery powered. There were three of the type on CR (each was a bit different) and there was a thread about them on here not too long ago with photos of each.

_________________
G.
______________________________________
Radio crackles - "What the #^(& did we just hit, over?"


Offline
 Profile  
 
 Post subject: Re: Interesting "Critter" Spotted At Enola Yard
PostPosted: Wed Jun 10, 2020 10:15 am 

Joined: Fri Dec 03, 2004 9:42 pm
Posts: 2691
Yep, what TD said, very small shop switcher.

Remember the (in)famous 1/2 GG1? This is the modern era version of it. Made from bits and pieces they had on hand. It probably wouldn't make sense to build new, but made from spare parts, it's economical and it works so why not?


Offline
 Profile  
 
 Post subject: Re: Interesting "Critter" Spotted At Enola Yard
PostPosted: Wed Jun 10, 2020 1:54 pm 

Joined: Sat Nov 28, 2015 7:28 pm
Posts: 515
Location: Northern WV
A railfan special I was on in 1990 stopped at Metro North's maintenance facility and I got a shot of their "critter".


Attachments:
190b0290.jpg
190b0290.jpg [ 67.01 KiB | Viewed 3072 times ]

_________________
Roger Cole
Offline
 Profile  
 
 Post subject: Re: Interesting "Critter" Spotted At Enola Yard
PostPosted: Wed Jun 10, 2020 3:49 pm 

Joined: Mon Aug 23, 2004 5:10 pm
Posts: 1079
I am not 100% positive, but I believe this little shunter is used to spot locomotives on the wheel truing machine inside this building.


Offline
 Profile  
 
 Post subject: Re: Interesting "Critter" Spotted At Enola Yard
PostPosted: Wed Jun 10, 2020 7:38 pm 

Joined: Sat Apr 01, 2006 5:19 pm
Posts: 477
Location: Bowie, MD
Perhaps the last piece of in-use NS equipment in Conrail blue?

Bob


Offline
 Profile  
 
 Post subject: Re: Interesting "Critter" Spotted At Enola Yard
PostPosted: Wed Jun 10, 2020 9:11 pm 

Joined: Mon Aug 23, 2004 5:10 pm
Posts: 1079
There is a Conrail blue caboose/cabin car/shoving platform here in Lancaster, Pa.


Offline
 Profile  
 
 Post subject: Re: Interesting "Critter" Spotted At Enola Yard
PostPosted: Thu Jun 11, 2020 2:58 am 

Joined: Sat Aug 24, 2013 3:25 am
Posts: 69
The previous thread regarding these: viewtopic.php?f=1&t=44370


Offline
 Profile  
 
 Post subject: Re: Interesting "Critter" Spotted At Enola Yard
PostPosted: Tue Jan 12, 2021 9:51 am 

Joined: Mon Jan 11, 2021 10:22 am
Posts: 4
That is 100% the shunter that transports locomotives on + off that wheel truing machine. I saw it in action in 2016 when I went to document said wheel truing machine, as it was the second underfloor wheel truing machine ever installed. It was in operation for 65 years! You can see a photo of the wheel truing machine here: https://smtgroup.com/dependable-machine-tools-that-endure/ - I'm actually finishing a short video about it fairly soon.


Offline
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 11 posts ] 

All times are UTC - 5 hours [ DST ]


 Who is online

Users browsing this forum: Google [Bot], mattman, NVPete and 83 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: