| Railway Preservation News http://www.rypn.org/forums/ |
|
| CP-26-e2,3,4, Compressor http://www.rypn.org/forums/viewtopic.php?f=1&t=45223 |
Page 1 of 1 |
| Author: | sixaxlealco [ Tue Jan 26, 2021 10:01 am ] |
| Post subject: | CP-26-e2,3,4, Compressor |
Good Afternoon, We are looking for a CP-26-E2,E3,E4 compressor. Operating voltage for the motor does not matter. Our motor is OK/repairable, the compressor is shot. This is an old GE compressor for an HH660 but was also found in older electric locomotives with a different motor voltage. I have a picture of the NYC S1 in Glenville NY and it has the compressor we need. Any help or suggestions would be appreciated. Please reach out to me at Michael.Thomas@gvtrail.com. Regards, Michael Thomas |
|
| Author: | JeffH [ Thu Jan 28, 2021 11:24 pm ] |
| Post subject: | Re: CP-26-e2,3,4, Compressor |
What's wrong with the compressor portion itself? |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|