Railway Preservation News http://www.rypn.org/forums/ |
|
Diesel Locomotive Spark Arrestors http://www.rypn.org/forums/viewtopic.php?f=1&t=48048 |
Page 1 of 1 |
Author: | Nova55 [ Thu Apr 18, 2024 12:45 am ] |
Post subject: | Diesel Locomotive Spark Arrestors |
I am desperately trying to find information of both of these styles of spark arrestor seen below. I have never turned up such a blank researching anything as I have with these. Any kind of builder information, spec sheets, manuals, anything would b a huge help. The top one was offered in both a "geep" and a "switcher" size. Thanks |
Author: | Mike Tillger [ Thu Apr 18, 2024 7:20 am ] | ||
Post subject: | Re: Diesel Locomotive Spark Arrestors | ||
Start here: https://www.fs.usda.gov/t-d/pubs/html/03511308/03511308.htm#Guide and check out the file which is out of date but may be helpful. Mike Tillger
|
Author: | Nova55 [ Thu Apr 18, 2024 11:29 am ] |
Post subject: | Re: Diesel Locomotive Spark Arrestors |
Thanks for the link Mike, but unfortunately no, that does not help. That only mentions the Hapco external arrestors, who is one of/the only people making them today. These are out of the 1960's/70's. |
Author: | jayrod [ Thu Apr 18, 2024 2:17 pm ] |
Post subject: | Re: Diesel Locomotive Spark Arrestors |
All I can tell you that the top one is "lifting" and the bottom "non-lifting". I don't know if EMD made them or bought them from a supplier. Preston might know if he checks this thread. I do know you can buy them in HO scale but likely not much help, either. |
Author: | EWrice [ Wed Apr 24, 2024 1:44 pm ] |
Post subject: | Re: Diesel Locomotive Spark Arrestors |
I have access to a set on an ex GTW SW9. I believe the tags are still attached to them. I know they do a good job of accumulating oil from wet stacking and making a mess of the stacks. |
Author: | Nova55 [ Wed May 01, 2024 12:04 pm ] |
Post subject: | Re: Diesel Locomotive Spark Arrestors |
EWrice wrote: I have access to a set on an ex GTW SW9. I believe the tags are still attached to them. I know they do a good job of accumulating oil from wet stacking and making a mess of the stacks. If by chance you could get a photo of the tags and a few basic measurements of them (overall height of the arrestor, the base width/length and the height of just the square base) that would be swell! Thanks! |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |