Railway Preservation News
http://www.rypn.org/forums/

Injectors and 11" air compressor for sale
http://www.rypn.org/forums/viewtopic.php?f=2&t=30496
Page 1 of 1

Author:  PhilJ [ Thu Dec 02, 2010 12:27 pm ]
Post subject:  Injectors and 11" air compressor for sale

I have available the following items:

Qty. 3 Pemberthy 2" non lifting injectors complete in good used condition - $1800 ea. or make offer.

Qty. 2 Pemberthy 1 1/2" non lifting injectors complete in new never used condition - $2000 ea. or make offer.

Qty. 2 Chinese #9 lifting injectors complete in new never used condition - $2000 ea. or make offer.

Qty. 1 Westinghouse 11" single stage air compressor complete in operating condition - $10,000 or make offer.

Please respond via PM if you're interested. Thanks!

Phil Johnson
Georgetown Loop RR
Georgetown, Colorado

Author:  jasonsobczynski [ Mon Dec 06, 2010 11:58 pm ]
Post subject:  Re: Injectors and 11" air compressor for sale

The 2" injectors are at most worth $300-$400 each (ebay pricing). The 1 1/2" are a steal at $2000 as are the chinese injectors, should also be noted that the chinese injectors had new tail pieces made for NPT threads. The 11" air pump is in a reconditioned but not rebuilt condition(assuming this is the one off of the 111), at most it is worth $7,500.

FYI

Author:  PhilJ [ Fri Dec 10, 2010 12:12 pm ]
Post subject:  Re: Injectors and 11" air compressor for sale

The Chinese injectors have been sold and are no longer available. Please PM me if anyone is interested in any of the other stuff.

Thanks,

Phil

Author:  Frisco1522 [ Wed Dec 11, 2013 12:21 pm ]
Post subject:  Re: Injectors and 11" air compressor for sale

These air pumps would be of somewhat minimal value as cores. It's obvious they need complete rebuilding with new piston rods at the very minimum.
Bernie Watts would be your go to guy on value.

Author:  Dave [ Wed Dec 11, 2013 1:47 pm ]
Post subject:  Re: Injectors and 11" air compressor for sale

Hey Frisco, there's only one pump mentioned here and it isn't the two you are talking about from another thread.

dave

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/