Railway Preservation News http://www.rypn.org/forums/ |
|
WANTED: M-38-C brake valve http://www.rypn.org/forums/viewtopic.php?f=2&t=38432 |
Page 1 of 1 |
Author: | ATK [ Mon Aug 10, 2015 2:48 pm ] | ||
Post subject: | WANTED: M-38-C brake valve | ||
Looking for an M-38-C brake valve that is either a known good, serviceable valve or one that can be rebuilt without too much effort.
|
Author: | ATK [ Mon Jan 25, 2016 11:09 pm ] |
Post subject: | Re: WANTED: M-38-C brake valve |
Bump. Still looking for a spare M-38-C valve, however now of even greater importance, would like to acquire the pipe bracket this valve sits on. Need this pipe bracket to build a test fixture for the purpose of qualifying these brake valves. If you have one and are willing to part with it, please let me know. |
Author: | Jdelhaye [ Tue Jan 26, 2016 10:53 am ] |
Post subject: | Re: WANTED: M-38-C brake valve |
You may want to try contacting the scrapper with all the RDC's mentioned in this thread: viewtopic.php?f=1&t=39030 Jeff |
Author: | ATK [ Tue Jan 26, 2016 2:06 pm ] |
Post subject: | Re: WANTED: M-38-C brake valve |
Thanks, but I believe that all of those RDC's in Moncton were rebuilt with 26 brake valves. |
Author: | CTA4453 [ Tue Jan 26, 2016 6:01 pm ] |
Post subject: | Re: WANTED: M-38-C brake valve |
ATK wrote: Bump. Still looking for a spare M-38-C valve, however now of even greater importance, would like to acquire the pipe bracket this valve sits on. Need this pipe bracket to build a test fixture for the purpose of qualifying these brake valves. If you have one and are willing to part with it, please let me know. PABCO should be able to help you out with cleaning and certifying those valves. Give Bill a call and see what he says. |
Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |