Railway Preservation News
http://www.rypn.org/forums/

Bridgeport Milling Machine
http://www.rypn.org/forums/viewtopic.php?f=2&t=40514
Page 1 of 1

Author:  Genetix [ Wed Mar 22, 2017 2:47 am ]
Post subject:  Bridgeport Milling Machine

I'm selling my bridgeport mill. Specs are as follows
-110 volt head and power feed.
-step pulley speed change
-36×9 inch table
-comes with a Kurt vise
-comes with hold down kit
-.007 of slop in handles
-adjustable leveling feet

The machine is located in Silver Plume, Colorado at a private residence.

I am asking $5000 OBO

Author:  LVRR2095 [ Fri Mar 24, 2017 4:08 pm ]
Post subject:  Re: Bridgeport Milling Machine

Genetix wrote:
I'm selling my bridgeport mill. Specs are as follows
-110 volt head and power feed.
-step pulley speed change
-36×9 inch table
-comes with a Kurt vise
-comes with hold down kit
-.007 of slop in handles
-adjustable leveling feet

The machine is located in Silver Plume, Colorado at a private residence.

I am asking $5000 OBO

While I am not in the market.....you might want to mention if it is an "M" head or a "J" head. It makes a difference.

Keith

Author:  Boiler Water [ Sat Mar 25, 2017 7:33 am ]
Post subject:  Re: Bridgeport Milling Machine

J vs M Heads : http://www.chaski.org/homemachinist/viewtopic.php?t=87210

Author:  Genetix [ Tue Mar 28, 2017 12:33 am ]
Post subject:  Re: Bridgeport Milling Machine

It is a J head mill.

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/