Railway Preservation News
http://www.rypn.org/forums/

Parts sw1
http://www.rypn.org/forums/viewtopic.php?f=2&t=43592
Page 1 of 1

Author:  EMD_mail [ Mon Jul 29, 2019 9:43 pm ]
Post subject:  Parts sw1

Wanted to offer sw1 parts for sale 6-567 UC prime mover (this has water jumpers in the air box like the later straight C blocks) main gen. traction motors d17 d27 let me know your needs would be happy to pull spacific parts

Update on possible frame number looks to be 7 A where builder plate was

Not sure what orange paint was other then Illinois Central Gulf.......just a guess

Author:  Rusty_Old_F250 [ Tue Jul 30, 2019 2:05 am ]
Post subject:  Re: Parts sw1

Where’s the unit located? Does it have a linear throttle or the conventional 8 notch throttle?

Sam

Author:  EMD_mail [ Thu Aug 01, 2019 6:26 pm ]
Post subject:  Re: Parts sw1

Linear it is in the north east

Author:  Ed Raye [ Fri Aug 02, 2019 1:11 pm ]
Post subject:  Re: Parts sw1

Still interested in the oil cooler if it is available. Would like measurements to make sure it is the right size.

Author:  New773 [ Fri Aug 02, 2019 9:14 pm ]
Post subject:  Re: Parts sw1

Is a headlight from either end available?

Author:  Mike Tillger [ Tue Aug 06, 2019 9:16 pm ]
Post subject:  Re: Parts sw1

What shape is the water tank in? Do you any photos?
Thanks,
Mike Tillger

Author:  RCD [ Mon Feb 03, 2020 11:12 pm ]
Post subject:  Re: Parts sw1

If it has the origenal handbrake this guy is looking viewtopic.php?f=2&t=43544

Author:  JamesNorvell [ Thu Feb 06, 2020 1:50 am ]
Post subject:  Re: Parts sw1

Does your SW1 have any of the class light parts?

Author:  EMD_mail [ Sun Sep 27, 2020 11:38 pm ]
Post subject:  Re: Parts sw1

8-5-2021 update

Aux gone
Fan parts gone
Load reg gone
Headlights gone
Handbrake gone
14 brake stand gone
Ground lights gone
Pain bearing (friction) thrust shims gone (all)

Have 6 k valve SOLD
Have plain bearing (friction) brass/ full set available
Brass thrust endplate 6 available

Still for sale tm 1 d27 2 d17
Prime mover 567 UC
Main gen megged ok
Compressor
Cast locomotive bell also available if interested

Air brake parts left
Strainers/filter
equilizing res.
Valve and bracket T9102 (marked)
(Happy to send pictures if interested)


Trucks and wheels at right price

Let me know your needs

Author:  EMD_mail [ Sat Nov 07, 2020 2:48 pm ]
Post subject:  Re: Parts sw1

One serviceable coupler

Author:  CSXT4849 [ Thu Nov 26, 2020 4:52 pm ]
Post subject:  Re: Parts sw1

Sent you a message about the bell

Author:  EMD_mail [ Sun Jul 25, 2021 2:31 pm ]
Post subject:  Re: Parts sw1

BTT

Author:  Andrew Durden [ Mon Jul 26, 2021 4:28 pm ]
Post subject:  Re: Parts sw1

Plain bearing, I assume?

Author:  EMD_mail [ Mon Jul 26, 2021 10:08 pm ]
Post subject:  Re: Parts sw1

Correct I think that is in the 4th post back, are you interested? They are from 67 if I recall

Author:  EMD_mail [ Fri Oct 01, 2021 5:52 pm ]
Post subject:  Re: Parts sw1

Update....Most of the brake valves are gone strainers are left equilizing res. Valve and bracket T9102

List updated

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/