It is currently Thu Mar 28, 2024 5:13 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 6 posts ] 
Author Message
 Post subject: For caboose restoration - 3/4" Westinghouse shut-off cock
PostPosted: Sun Oct 06, 2013 2:50 am 

Joined: Wed Oct 12, 2011 1:53 pm
Posts: 6
Needed for C&S caboose restoration a 3/4" Westinghouse shut-off cock for conductors air dump valve. This valve was found in the cupola next to the train line pressure gauge, the Westinghouse logo was cast on the side of the valve body.
Please contact Richard Farmer
Gwenloco1@aol.com


Offline
 Profile  
 
 Post subject: Re: For caboose restoration - 3/4" Westinghouse shut-off coc
PostPosted: Wed Oct 23, 2013 10:37 am 

Joined: Mon Jun 24, 2013 1:14 pm
Posts: 205
Like this one?

http://adirondack.x10.mx/Project_albums/Pages/conductors_valve.html

The 3D CAD exists, ready to be cast.

Let me know your thoughts.

Cheers,

Chris


Attachments:
RW-valve-3.jpg
RW-valve-3.jpg [ 28.7 KiB | Viewed 5851 times ]
Offline
 Profile  
 
 Post subject: Re: For caboose restoration - 3/4" Westinghouse shut-off coc
PostPosted: Thu Oct 24, 2013 1:46 am 

Joined: Tue Jan 25, 2011 2:07 am
Posts: 328
Rotary type caboose valve. Don't know if this is the type needed or not.
Attachment:
caboose_valve.jpg


Image
Caboose valve instructions by rbdal (Back online), on Flickr


Offline
 Profile  
 
 Post subject: Re: For caboose restoration - 3/4" Westinghouse shut-off coc
PostPosted: Mon Oct 28, 2013 11:39 am 

Joined: Wed Oct 12, 2011 1:53 pm
Posts: 6
FLO - Thanks for the great photo. What I have found in my research is the valve in the cupola of our car was a simple straight 3/4" Westinghouse shut-off cock. So I assume the conductor had to be careful and keep an eye on the pressure gauge when operating the valve.


Offline
 Profile  
 
 Post subject: Re: For caboose restoration - 3/4" Westinghouse shut-off coc
PostPosted: Tue Jan 14, 2014 8:18 pm 

Joined: Wed Oct 12, 2011 1:53 pm
Posts: 6
Thanks to all who looked and to those who replied - I have located exactly the valve I needed
RF


Offline
 Profile  
 
 Post subject: Re: For caboose restoration - 3/4" Westinghouse shut-off coc
PostPosted: Thu Jan 16, 2014 2:31 pm 

Joined: Tue Jun 26, 2007 12:00 am
Posts: 551
Location: Dallas ,Texas. USA
FLO,

What equipment (RR, etc..) was the multi-position vavle in your attached photo used on?

_________________
Loco112 (NarrowGaugeExchange Forum)

Our "paper" archives will be the future railfans only hope. We (yes you too!) should endeavor to preserve all the info needed to allow them 100% accuracy in the building of their recreations.


Offline
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 6 posts ] 

All times are UTC - 5 hours [ DST ]


 Who is online

Users browsing this forum: No registered users and 22 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: