It is currently Tue Mar 19, 2024 7:18 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: Conrail ex-NYC Rotary Snowplow
PostPosted: Tue Apr 10, 2007 9:52 am 

Joined: Sun Aug 22, 2004 10:18 pm
Posts: 129
Location: Philadelphia, PA
Can anyone advise if the Conrail (ex-NYC X-659) Cooke rotary snowplow that was last assigned to Frontier Yard in Buffalo made it to be preserved. I understand it was retired by the CSXT shortly after the merger.

I have the file out of our Mechanical Engineering office that details the 1950 NYC steam to electric conversion as well as the Conrail 1978 overhaul.

EBL


Offline
 Profile  
 
 Post subject: Re: Conrail ex-NYC Rotary Snowplow
PostPosted: Tue Apr 10, 2007 12:10 pm 

Joined: Sun Aug 22, 2004 11:06 am
Posts: 539
Location: NE PA
Eric,
Check out this site
http://www.trainweb.org/wnyrhs/mow.htm
Mike


Offline
 Profile  
 
 Post subject: Re: Conrail ex-NYC Rotary Snowplow
PostPosted: Tue Apr 10, 2007 7:42 pm 

Joined: Mon Aug 30, 2004 3:24 pm
Posts: 462
Location: Scranton, PA
It occurred to me during our last round of snowstorms that the fleet of plows must be getting smaller, since nearly every museum has at least one snow plow, rotary, flanger or spreader in its collection. My question is "Are there new railroad snow plows being made, or are the small plows on a handful of locomotives sufficient?" The weather is definitely something a railroad can not avoid. Any answers?


Offline
 Profile  
 
 Post subject: Re: Conrail ex-NYC Rotary Snowplow
PostPosted: Tue Apr 10, 2007 8:09 pm 

Joined: Sun Oct 23, 2005 3:44 pm
Posts: 46
Location: Reno, Nevada
The last Jordan Spreader that I know of was custom built for the Alaska Railroad by Harsco (sucessor to the Jordan Co.). By that time Jordan Spreader production had been shut down for 19 years and Harsco had to call back thier old production manager out of retirement to act as a consultant becuase no one else had the experience making them.

Snow fighting equipment does not wear out fast since it's only used a couple of times of the year and sits n a siding for most of its lifetime.

I know of an ex-NP Juell Plow on the Red River Valley and Western that was built in the 1920s. Many class 1 railroads have Russell snowplows dating to back before that.

I'd guess that when it comes down to it, once the need for new Jordan Spreaders, Russel Plows and other snow fighting equipment arises, raildroads will rebuild existing ones or come up with new designs they can build in thier shops or contract out.


Offline
 Profile  
 
 Post subject: Last fox trucks, last piece of R. W & O. Equipment left?
PostPosted: Tue Apr 10, 2007 8:13 pm 

Joined: Sun Aug 22, 2004 11:54 am
Posts: 746
Location: Michigan
Dumb question I know, but there can't be too many fox-plate trucks left in existence. Could this be the last active pair? I know I've only seen them in b/w photographs before this.

Also, is this the only surviving piece of Rome, Waterstown & Ogdensburg equipment left? Wasn't there a caboose out there somewhere?


Image

TJ Gaffney


Offline
 Profile  
 
 Post subject: Re: Last fox trucks, last piece of R. W & O. Equipment l
PostPosted: Wed Apr 11, 2007 12:52 am 

Joined: Tue Aug 02, 2005 1:25 pm
Posts: 6397
I can understand the conversion to roller bearings, but why not leave the cover plates in place?

Les


Offline
 Profile  
 
 Post subject: Re: Last fox trucks, last piece of R. W & O. Equipment l
PostPosted: Wed Apr 11, 2007 6:59 am 

Joined: Mon Aug 23, 2004 7:26 pm
Posts: 332
Location: Hammond, WI
Image
M&StL 4570 at Mid-Continent still has her fox trucks:
http://www.midcontinent.org/collectn/woodfrt/mstl4570.html

_________________
Boyd


Offline
 Profile  
 
 Post subject: Re: Last fox trucks, last piece of R. W & O. Equipment l
PostPosted: Wed Apr 11, 2007 9:31 am 

The plant that built Fox trucks was still standing in Joliet, IL the last time I was there about two years ago. It is quite an interesting building, utilizing limestone masonry construction.

Tom Cornillie


  
 
 Post subject: Roller-bearing conversions
PostPosted: Wed Apr 11, 2007 10:53 am 

Joined: Mon Oct 11, 2004 8:42 am
Posts: 440
Location: Haslett, Michigan USA
When equipment is converted from solid to roller bearings, the journal-box covers are removed so bearing failure can be detected by eye, smell, or by hotbox detectors.

_________________
Aarne H. Frobom
The Steam Railroading Institute
P. O. Box 665
Owosso, Michigan 48840-0665


Offline
 Profile  
 
 Post subject: Re: Last fox trucks, last piece of R. W & O. Equipment l
PostPosted: Wed Apr 11, 2007 10:53 am 

Joined: Wed Oct 26, 2005 11:18 pm
Posts: 160
Location: Anderson, Indiana
Les,

When the railroads reuse friction boxes, the lids are left off so that the hot box detectors are not fooled and also so that crews would quickly see that they didn't need to service these boxes. I suspect there was an AAR rule on this that eliminated the covers. No reason why they couldn't be put back on in a museum.

David Farlow
Whitewater Valley RR


Offline
 Profile  
 
 Post subject: Re: Last fox trucks, last piece of R. W & O. Equipment l
PostPosted: Wed Apr 11, 2007 12:36 pm 
User avatar

Joined: Sun Aug 22, 2004 7:07 am
Posts: 1114
Location: Northeastern US
I'm curious as to why there is interest in this rotary....maybe someone's been reading Gary Krist's excellent new novel "The White Cascade" :-)))

_________________
http://www.restorationstories.com


Offline
 Profile  
 
 Post subject: Re: Last fox trucks, last piece of R. W & O. Equipment l
PostPosted: Thu Apr 12, 2007 8:26 am 

Joined: Mon Aug 23, 2004 8:17 am
Posts: 614
Location: Taylors, SC
Note that Fox Plate trucks and regular Fox trucks are different animals. As the picture of the plow's trucks shows, the plate truck sideframes are fabricated from a flat piece of steel. The Fox trucks we usually think of are pressed steel, with about a 2" flange all the way around the sideframe edge.

Several years ago, I did an informal survey of surviving Fox trucks. Naturally I didn't write down the list I came up with so it would have to be compiled again. IIRC, I found about a dozen pair of Fox trucks on the continent. Only about half were still in use under a car.

SCRM has a 1906 flat car built by Pressed Steel that rides on Fox trucks. I can only take the car's history back to the middle 1960s, before that it's a complete mystery. The build date is an educated guess based on a date cast into the couplers.

Here's a pic of our car, which unfortunately doesn't show the trucks very clearly: http://www.scrm.org/HTMsrc/fr234.htm

This is my favorite car in our collection. One day, when we have a shop to work in, I'm going to attack it and do a full restoration, replacing the brake rigging and rebuilding the bearings.

_________________
Matt Conrad -- scrmcurator@yahoo.com
Join the secret world of trains.
Feel the pleasure, touch the pain.
Drift into yesterday. --Jethro Tull


Offline
 Profile  
 
 Post subject: Re: Last fox trucks, last piece of R. W & O. Equipment l
PostPosted: Thu Apr 12, 2007 9:47 am 

Joined: Wed Jan 25, 2006 5:00 pm
Posts: 822
Location: NJ
How did this thread get highjacked from snow plows to Fox trucks?

Later!
Mr. Ed


Offline
 Profile  
 
 Post subject: Re: Conrail ex-NYC Rotary Snowplow
PostPosted: Wed Dec 20, 2017 11:02 am 

Joined: Sun Sep 14, 2014 5:05 pm
Posts: 1227
Has anybody ever established if Conrail had one or two rotaries? Here is what I have on NYC rotaries:

27 Cooke 01-1889 Rome, Watertown & Ogdensburg Ry
New York Central
28 Cooke 01-1889 New York Central & Hudson River RR #X-659
New York Central #X-659
(converted to electric 1951)
Penn Central #64599 1968
Conrail #64599 1976
CSX 1999 (retired 2001)
Western New York Ry Historical Society 11-03
http://www.trainweb.org/wnyrhs/mow.htm
66465 Cooke 01-1926 New York Central #X-660
(converted to electric)
Penn Central #60021
ConRail #60021
Scrapped 1980s
http://www.modelrailroading.nl/collecti ... c-x660.jpg
http://www.railpictures.net/images/d1/8 ... 834375.jpg
http://www.railpictures.net/images/d2/1 ... 531582.jpg


Offline
 Profile  
 
 Post subject: Re: Conrail ex-NYC Rotary Snowplow
PostPosted: Wed Dec 20, 2017 5:44 pm 

Joined: Mon Sep 28, 2015 12:30 am
Posts: 290
In what I've collected about rotary snowplows, I've never seen a reference to #27 surviving to Penn Central ownership, let alone Conrail. And it's the #28/X-659 that I show as becoming #60021 for subsequent owners.

My information doesn't show the X-660 as surviving her NYC ownership nor any sign of being repowered with electric traction motors. I'd bet good money that the Central in the 1960's decided that two rotaries was a luxury that they no longer needed, with the much older plow being spared thanks to already having been converted.

Edit: Or my data is incomplete...

http://www.railroad.net/articles/railfa ... g_9758.jpg


Offline
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 17 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


 Who is online

Users browsing this forum: Google [Bot], Majestic-12 [Bot] and 46 guests


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: