It is currently Wed Dec 02, 2020 3:36 pm

View unanswered posts | View active topics


Board index » Railway Preservation News » Interchange

All times are UTC - 5 hours [ DST ]



Post new topic Reply to topic  Page 2 of 2
  [ 28 posts ]  Go to page Previous  1, 2
  Print view Previous topic | Next topic 
Author Message
WVNorthern
 Post subject: Re: Steam era fittings and parts catalogs
PostPosted: Sun Jan 12, 2020 3:17 pm 

Joined: Sat Nov 28, 2015 7:28 pm
Posts: 507
Location: Northern WV
An Underwood portable boring machine. The H.B. Underwood Company made a lot of portable locomotive machines mainly for short lines without extensive shop facilities.

http://vintagemachinery.org/mfgindex/im ... px?id=3922

_________________
Roger Cole

Offline
 Profile  
 
Rick A
 Post subject: Re: Steam era fittings and parts catalogs
PostPosted: Fri Feb 07, 2020 10:40 pm 

Joined: Tue Aug 27, 2019 9:48 pm
Posts: 231
Location: Milford,Ma
Well, now that we know where to get the parts, here are some books on what to do with the parts.

Track standards 1910
by Rehm, Norman F., ed

https://archive.org/details/trackstanda ... road+frogs

Practical track work 1915
by Van Auken, Kenneth L 1885-

https://archive.org/details/practicaltr ... road+frogs

The Road-master's Assistant and Section-master's Guide: A Manual of ...
by William S. Huntington , Charles Latimer

https://archive.org/details/roadmasters ... road+frogs

The trackman's helper. A pocket companion for track foreman generally ..1891
by Kindelan, Joseph

https://archive.org/details/trackmanshe ... road+frogs
Offline
 Profile  
 
Rick A
 Post subject: Re: Steam era fittings and parts catalogs
PostPosted: Mon Feb 17, 2020 3:32 pm 

Joined: Tue Aug 27, 2019 9:48 pm
Posts: 231
Location: Milford,Ma
Here are 3 Sweets catalogues spanning the years 1917-1933. There are many differences between the 3 so check them out.

Sweet engineering catalogues : a file of manufacturers' catalogues of industrial building products, power plant equipment, material handling equipment, factory equipment.
by Sweet's Catalogue service

https://archive.org/details/sweetsengin ... +regulator

https://archive.org/details/SweetsEngin ... catalogues

https://archive.org/details/SweetEngine ... or+catalog
Offline
 Profile  
 
Rick A
 Post subject: Re: Steam era fittings and parts catalogs
PostPosted: Fri Mar 06, 2020 11:54 am 

Joined: Tue Aug 27, 2019 9:48 pm
Posts: 231
Location: Milford,Ma
The Progress of Marine-engineering: From the Time of Watt Until the Present Day. With Sixty ...
by Thomas Main 1893

https://archive.org/details/progressmar ... am+engines


Steam boilers, engines and turbines 1908
by Walker, Sydney Ferris

https://archive.org/details/steamboiler ... am+engines


Steam And Other Engines 1907
by Duncan J

https://archive.org/details/in.ernet.dl ... am+engines


Steam and Its Uses: Including the Steam Engine, the Locomotive, and Steam ...
by Dionysius Lardner 1856

https://archive.org/details/steamandits ... am+engines
Offline
 Profile  
 
Rick A
 Post subject: Re: Steam era fittings and parts catalogs
PostPosted: Tue Mar 10, 2020 4:30 pm 

Joined: Tue Aug 27, 2019 9:48 pm
Posts: 231
Location: Milford,Ma
L.M.Rumsey MFG Co.: Illustrated catalogue of plumbers, gas and steam fitters, machinists, engine builder and railroad supplies. 1885
by L. M. Rumsey Co.

https://archive.org/details/L.M.RumseyC ... m+fittings


Eclipse steam specialties, catalog D. 1920
by Illinois Engineering Co

https://archive.org/details/IllinoisEng ... ure+gauges


Lidgerwood cableways for hoisting and conveying : this section of the cableway catalog shows typical installations of Lidgerwood cableways for building dams and locks
by Lidgerwood Manufacturing Company. 1912
https://archive.org/details/LidgerwoodC ... y+catalogs
Offline
 Profile  
 
Rick A
 Post subject: Re: Steam era fittings and parts catalogs
PostPosted: Sat Apr 18, 2020 4:19 pm 

Joined: Tue Aug 27, 2019 9:48 pm
Posts: 231
Location: Milford,Ma
Hand-book of the Locomotive: Including the Construction, Running, and Management of Locomotive ...1890
by Stephen Roper

https://archive.org/details/handbookloc ... am+engines
Offline
 Profile  
 
Rick A
 Post subject: Re: Steam era fittings and parts catalogs
PostPosted: Tue Apr 21, 2020 10:56 pm 

Joined: Tue Aug 27, 2019 9:48 pm
Posts: 231
Location: Milford,Ma
The engineer's epitome 1892
by Smith, N[ewton], J. [from old catalog]

https://archive.org/details/engineersep ... team+gauge



Boiler accessories; 1909
by American School of Correspondence; Leland, Walter S. [from old catalog]

https://archive.org/details/boileracces ... team+gauge



Forged steel water-tube marine boilers .. 1914
by Babcock & Wilcox Company

https://archive.org/details/bub_gb_fhaD ... team+gauge



Specifications for triple-expansion twin-screw propelling engines, with boilers and auxiliary machinery, for an armored cruiser about 9100 tons cruising displacement, to make a speed of twenty knots per hour at a displacement of 8150 tons.
by United States. Navy Dept. Bureau of Engineering 1892

https://archive.org/details/specificati ... eam+gauges
Offline
 Profile  
 
David Dewey
 Post subject: Re: Steam era fittings and parts catalogs
PostPosted: Wed Apr 22, 2020 12:17 am 

Joined: Fri Oct 01, 2004 1:33 pm
Posts: 449
Location: Oroville, CA
Because of my dial-up connection I haven't been able to look at the illustrations, but the description of the 1914 B & W forged steel watertube marine boilers fits the description of the boilers put in the Delta King and Delta Queen steamboats in 1928--they were/are surplus navy boilers that were brand-new then, although some 14 years old! Designed for 450 lbs steam, the DQ & DK ran them at 250 lbs (this is all from memory, so if im off a bit, sorry!), which is one reason they lasted clear until now. The proposal to sail the DQ again calls for new boilers, so these have apparently, run out of life, either mechanically or economically.
On a locomotive, you just lift the boiler off the frame, on a steamboat, the dang'd things are buried in the hull under all that superstructure!
Attachment:
Boiler end & gauges web.jpg
Boiler end & gauges web.jpg [ 177.88 KiB | Viewed 1809 times ]

Attachment:
Boiler firing web.jpg
Boiler firing web.jpg [ 105.28 KiB | Viewed 1809 times ]

Attachment:
boiler side web.jpg
boiler side web.jpg [ 129.95 KiB | Viewed 1809 times ]

_________________
Steamcerely,
David Dewey
Hoping for the return to the American Rivers of the last overnight steamboat, Delta Queen!

Offline
 Profile  
 
Rick A
 Post subject: Re: Steam era fittings and parts catalogs
PostPosted: Sun Apr 26, 2020 11:04 pm 

Joined: Tue Aug 27, 2019 9:48 pm
Posts: 231
Location: Milford,Ma
Bristol's recording instruments manufactured by the Bristol Company, Waterbury, Conn., U.S.A. 1925
by Bristol Company

https://archive.org/details/BristolsRec ... am++gauges



The Cameron & Barkley Company : Machinery and Supplies : Catalogue D 1911
by Cameron & Barkley Co.

https://archive.org/details/CameronAndB ... am++gauges
Offline
 Profile  
 
sandiapaul
 Post subject: Re: Steam era fittings and parts catalogs
PostPosted: Tue Apr 28, 2020 6:55 am 

Joined: Fri Jan 29, 2010 9:26 am
Posts: 78
Location: Princeton, NJ
Thanks Richard for the Baker stuff!

Now does anyone have a Pyle National catalog? Especially the smaller stuff like junction boxes and such.
Offline
 Profile  
 
Rick A
 Post subject: Re: Steam era fittings and parts catalogs
PostPosted: Wed Apr 29, 2020 4:53 pm 

Joined: Tue Aug 27, 2019 9:48 pm
Posts: 231
Location: Milford,Ma
Sheet metal and supply co. - catalogue f.
by Sheet Metal and Supply Co

https://archive.org/details/SheetMetalS ... and+gauges



Handy Notes and Queries : A Manual of Useful Information of Especial Importance to Dealers in Hardware, Stoves and Tinware : Southern and Western Edition
by Henry Hopkins & Co. 1889

https://archive.org/details/HenryHopkin ... and+gauges



Canadian Machinery 1908-39

https://archive.org/details/canadianmac ... and+gauges
Offline
 Profile  
 
Rick A
 Post subject: Re: Steam era fittings and parts catalogs
PostPosted: Tue Oct 13, 2020 1:32 pm 

Joined: Tue Aug 27, 2019 9:48 pm
Posts: 231
Location: Milford,Ma
Pittsburgh Gage & Supply Company Blue Book of Supplies : Catalogue No. 12
by Pittsburgh Gage & Supply Co. 1913

https://archive.org/details/PittsburghG ... p?q=ashton
Offline
 Profile  
 
Dick_Morris
 Post subject: Re: Steam era fittings and parts catalogs
PostPosted: Wed Oct 14, 2020 6:08 am 

Joined: Wed Sep 25, 2013 12:36 am
Posts: 397
Location: Anchorage, Alaska
Sunbeam headlights, 1938
https://digital.hagley.org/08145553_sun ... locomotive
Offline
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  Page 2 of 2
  [ 28 posts ]  Go to page Previous  1, 2

Board index » Railway Preservation News » Interchange

All times are UTC - 5 hours [ DST ]

 Who is online

Users browsing this forum: Bobulltech, Google [Bot], nedsn3 and 126 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to:  
 

Powered by phpBB Group • Based on a design by bozUNtu
Copyright © 1998 thru 2015 all rights reserved, contents may not be used without permission.