It is currently Sun Nov 22, 2026 2:08 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 13 posts ] 
Author Message
 Post subject: Asbestos Question
PostPosted: Sun Oct 25, 2026 11:35 am 

Joined: Sun Jun 17, 2007 8:03 pm
Posts: 1122
Location: Warszawa, Polska
It's been 20 years since I did my asbestos training, and I'm curious what your reaction, or the reaction of your respective jurisdictions would be if...

... a contractor demolishing an old powerplant in the middle of a residential neighbourhood, dumped infinity tons of asbestos... EVERYWHERE, and just left it blowing around the neighbourhood like tumbleweed.

Would it be declared one of those "superfund" sites or something?

Based on all the precautions we were told to take when it came to working around asbestos, it seems completely insane that a contractor would do this. These photos are from 2018.

Here are some photos.


Attachments:
857012530_122128070103401589_1550470369031440875_n.jpg
857012530_122128070103401589_1550470369031440875_n.jpg [ 399.03 KiB | Viewed 19400 times ]
855887425_122128070895401589_5384418507936632551_n.jpg
855887425_122128070895401589_5384418507936632551_n.jpg [ 295.63 KiB | Viewed 19400 times ]
855833165_122128070151401589_1345135617300737633_n.jpg
855833165_122128070151401589_1345135617300737633_n.jpg [ 529.79 KiB | Viewed 19400 times ]

_________________
CNR 6167 in Guelph, ON or "How NOT To Restore A Steam Locomotive"
Offline
 Profile  
 
 Post subject: Re: Asbestos Question
PostPosted: Sun Oct 25, 2026 12:00 pm 

Joined: Tue Aug 24, 2004 6:30 am
Posts: 774
Where? Poland?


Offline
 Profile  
 
 Post subject: Re: Asbestos Question
PostPosted: Sun Oct 25, 2026 12:10 pm 

Joined: Thu Oct 08, 2015 11:54 am
Posts: 2079
Location: New Franklin, OH
Whoa. Assuming that is actually asbestos, if that happened here, the proverbial feculence would impact the circumvolving airfoils. The contractor would probably go bankrupt, thus off the hook (but maybe not those individually responsible) and our tax dollars would likely pay for a hideously expensive remediation. Even if that isn't asbestos, that's bad.

_________________
Eric Schlentner
Turner of Wrenches, Drawer of Things


Offline
 Profile  
 
 Post subject: Re: Asbestos Question
PostPosted: Sun Oct 25, 2026 4:11 pm 

Joined: Sun Jun 17, 2007 8:03 pm
Posts: 1122
Location: Warszawa, Polska
k5ahudson wrote:
Where? Poland?


Yes. Formerly the "Vladimir Lenin Power Plant" in the city of Łódź... how'd that get there?

First entered service in 1957. I can't imagine there would be anything but asbestos in such a facility...

Anyways, what do you think the Canadian response would be to such a situation?

_________________
CNR 6167 in Guelph, ON or "How NOT To Restore A Steam Locomotive"


Offline
 Profile  
 
 Post subject: Re: Asbestos Question
PostPosted: Sun Oct 25, 2026 6:43 pm 

Joined: Thu Oct 08, 2015 11:54 am
Posts: 2079
Location: New Franklin, OH
I'm not from Canada but I believe the government has a multi-billion fund set up for remediation and redevelopment of brownfield sites. And there's contractors that specialize in those cleanups.

_________________
Eric Schlentner
Turner of Wrenches, Drawer of Things


Offline
 Profile  
 
 Post subject: Re: Asbestos Question
PostPosted: Mon Oct 26, 2026 6:57 am 

Joined: Wed Mar 30, 2022 12:30 pm
Posts: 2
BTW, how was all the asbestos handled in North America when scrapping thousands of steam locomotives, and where was it sent?


Offline
 Profile  
 
 Post subject: Re: Asbestos Question
PostPosted: Mon Oct 26, 2026 9:26 am 

Joined: Tue Aug 24, 2004 10:34 pm
Posts: 969
If it got sent anywhere it probably went to the landfill eventually.

Back in maybe 1974 or 75 I was involved in getting the UP #440 to make the trip to Wi on its own wheels. By this time in my youth I had stripped 2 or 3 locomotives of their lagging or insulation. I had no idea and either did most of the population back then. But many people did and were more or less up to date on the health risks. I did not know anything about it. So in the UP yards of Lincoln, NB we got the #440 ready to roll. Had some time so I started poking around the severely rotted out jacketing of the boiler. I have never seen corrosion like this on any locomotive from water and asbestos. The UP in last boiler rebuild used what seemed like thousands of flexible stay bolts and the caps and sleeves were basically rotted off and deep pits in the wrapper sheets. So I started tearing the jacketing and insulation off the loco. I had to head back to Wi on Amtrack in a day or so. Got the jacketing off and saved in the tender and just scooped the wet insulation onto the ground. Before I left, the UP yard master happened by or someone like him anyway, he chewed me out a new one for making such a mess and he did know about asbestos being hazardous. He was seriously pissed. I had no clue as to why. Of course I understand now, but this was over 50 years ago. John Mansville in Waukegan, Ill was still running 3 shifts I think? I went home and the mess got cleaned up and swept under the rug no doubt. I have often thought of that supervisor and how pissed he was. Wasn't till a few years later did I understand why.

I am 71 now and wonder if my lungs are going to be what takes me? I stripped 5 locomotives in my life. UP #440, CB&Q 4960, NYC/CIPS 0-6-0 that MC used to have that went to Utica, NY? And 0-4-0 #701 at MC, and finally the Copper Range #29. No mask and came out looking like a ghost. Luckily the #701 and CR #29 had been redone in fibreglass. The only locomotive I saw in similar condition for leaving boiler lagging on was the SOO Line 4-6-2 in Tallulah park in Appleton Wi, you can see the deep pitting and damage from the ground, behind the fence.


Last edited by John Risley on Mon Oct 26, 2026 9:54 am, edited 2 times in total.

Offline
 Profile  
 
 Post subject: Re: Asbestos Question
PostPosted: Mon Oct 26, 2026 9:40 am 

Joined: Tue Aug 24, 2004 10:34 pm
Posts: 969
A lot of the insulation in the original post looks like pink fiberglass insulation? Most asbestos was installed in sheets or brick and crumbled into power when disturbed? Am sure there was asbestos in there. That guy left a serious mess, not unlike someone else I know, but they left a much bigger mess. I sincerely feel bad for the UP foreman I left such a mess for, not to mention a hazardous mess.


Offline
 Profile  
 
 Post subject: Re: Asbestos Question
PostPosted: Mon Oct 26, 2026 12:34 pm 

Joined: Mon Oct 05, 2020 11:38 pm
Posts: 53
WHOA!!!! That does not look like asbestos. Most of what is in the photos shows up as a white blob and could just as easily be cotton or whipped cream. I am retired from the power generation biz and I have seen a lot of it. Most pipe and vessel insulation is short fibers mixed with a gypsum plaster and shaped to conform to the shape of the object being insulated or sprayed on surfaces being protected. While that mess, asbestos or not , is ridiculous and not tolerated in most of North America, the rest of the world is not always so fortunate. I wonder when this occurred. There was a time when that could have been in this country. 94% of the people that get mesothelioma also smoked tobacco. Where is the outrage and fear of that?


Offline
 Profile  
 
 Post subject: Re: Asbestos Question
PostPosted: Mon Oct 26, 2026 5:08 pm 

Joined: Sun Jun 17, 2007 8:03 pm
Posts: 1122
Location: Warszawa, Polska
Just remember, these photos are from 2018. I got my asbestos training in 2008.

On top of seeing those, "did you work in a shipyard..." commercials most of my life...

So the dangers of dealing with asbestos were well established by the time I took these photos.

It seems like most of Poland is made from asbestos. Many old houses still have roofs made from these asbestos sheets. And of course there are so many abandoned bunkers and buildings, just filled to the brim with asbestos...

Attachment:
514344438_10162768661195609_8365495794686299010_n.jpg
514344438_10162768661195609_8365495794686299010_n.jpg [ 519.78 KiB | Viewed 17809 times ]


It just doesn't seem to be on peoples consciences over here... no "did you work in a shipyard..." commercials...

_________________
CNR 6167 in Guelph, ON or "How NOT To Restore A Steam Locomotive"


Offline
 Profile  
 
 Post subject: Re: Asbestos Question
PostPosted: Wed Oct 28, 2026 9:03 am 

Joined: Sun Aug 22, 2004 1:19 am
Posts: 228
Location: Chattanooga, TN
PAsteve3 wrote:
BTW, how was all the asbestos handled in North America when scrapping thousands of steam locomotives, and where was it sent?


Most likely went out with the other trash. Asbestos didn't become a serious public health and safety concern until the 70's.

_________________
Andrew Durden
Chief Mechanical Officer
Southeastern Railway Museum


Offline
 Profile  
 
 Post subject: Re: Asbestos Question
PostPosted: Sat Oct 31, 2026 10:55 pm 

Joined: Sun Jun 23, 2013 1:16 pm
Posts: 233
Was an old retired railroad backshop electrician, Joe, used to come watch us switch cars at the yard here in town. His wife had passed away and he didn't have anyone to keep him busy anymore, so to kill time he'd come park by the yard and watch us.
Our town was a major division point on the railroad and, as such, we had a huge locomotive shop. Joe ran the big overhead crane in the shop building.
During a lull in the action one day, I crawled off the engine and walked over to talk to Joe. Somehow the conversation turned to steam engines.
He said after dieselization, they were cutting up steam engines there south of the shop building.
He said they just dug a big pit and buried all the asbestos right there on the spot...

Come to think of it, when they tore down the big powerhouse that supplied steam and power for the facilities here, they buried all the asbestos out of that in what had been the basement...

Our city didn't have an actual municipal "landfill" til the late 1970's... there was a place out on the outskirts of town where we dumped trash....it was set on fire regularly, a hole was dug and the remains were shoved in with a dozer.


Offline
 Profile  
 
 Post subject: Re: Asbestos Question
PostPosted: Mon Nov 02, 2026 11:58 pm 

Joined: Mon Sep 28, 2015 12:30 am
Posts: 317
Burying it probably wasn't a bad idea. The only danger is when it becomes brittle and particles become airborne and get inhaled.

I tried to explain that to folks when a Great Lakes freighter went aground on rocks off Nova Scotia on her way to be scrapped in Turkey. Waterlogged asbestos in a wreck being broken up by the Atlantic Ocean in a remote area poses a heck of a lot less risk than it ultimately did to the people that got sent in to cut her up to protect the environment from the asbestos. But I didn't get very far.

It ultimately ended up that she hadn't been properly drained of fluids with several thousand gallons of diesel fuel left on her (unlike the empty wreck that was expected to be found). So recovering that was definitely a good move for the environment and justified the effort to a degree. But that could've just been pumped off for a heck of a lot less money than ultimately was expended on eliminating a wreck that soon would've disappeared under the waves after a couple of good storms.


Offline
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 13 posts ] 

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: