It is currently Wed Sep 30, 2026 5:24 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Researching Baldwin-built 0-4-4T
PostPosted: Mon Apr 05, 2004 10:55 am 

I'm trying to find some information on a Baldwin Forney 0-4-4T built in the late 19th century, builder #12990. I have a photo of it from about 1903 lettered C.U.T.Ry. #51, sublettered "Clearing Yards", suggesting it ran in Chicago. Can anyone suggest a source for information on this engine's origins?

Frank Hicks

Preserved North American Electric Railway Cars
F-Hicks@wiu.edu


  
 
 Post subject: Re: Researching Baldwin-built 0-4-4T
PostPosted: Mon Apr 05, 2004 12:23 pm 

According to CERA Bulletin #113, Chicago's Rapid Transit, Volume one, this is one of the South Side Forneys built in 1892 for the Chicago & South Side Rapid Transit, the first elevated line in Chicago. It was #26. They were all sold off after the line was electrified. The only survivor of these is stuffed and mounted in Cuba, in a highly modified condition. MOT has the only surviving Lake Street Elevated Forney from Chicago, #9, named the "Charles H." Its namesake was Charles H. Deere, son of John Deere and second president of Deere & Co, tractor builders to the world.



Museum of Transportation
rdgoldfede@aol.com


  
 
 Post subject: Re: Researching Baldwin-built 0-4-4T
PostPosted: Tue Apr 06, 2004 12:25 pm 

Ron,

Too bad there is not a picture of the Chicago Forney on the MOT web site.Perhaps some time.

I have an old post card of her when she was still painted in her Mexican scheme. I am sure she looks better now theat the Chicago paint has been restored.

God luch with your research!



ted_miles@nps.gov


  
 
 Post subject: Re: Researching Baldwin-built 0-4-4T
PostPosted: Tue Apr 06, 2004 1:38 pm 

You can see the Lake Street Forney at the left of the photo for our Roberts Building on the site Quick Tour. We did a lot more than repaint this loco, restoring its pilot to the original configuration for elevated service, replacing the back of the cab, and installing a new water tank of the original size. If the link doesn't work go to www.museumoftransport.org and then click on the quick tour link on the home page.

MOT Roberts Building
rdgoldfede@aol.com


  
 
 Post subject: Re: Researching Baldwin-built 0-4-4T
PostPosted: Tue Apr 06, 2004 4:17 pm 

Thanks for the info on #26!

Frank Hicks

F-Hicks@wiu.edu


  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: