| Railway Preservation News https://www.rypn.org/forums/ |
|
| NATHAN STYLE 52 BOILER TESTER https://www.rypn.org/forums/viewtopic.php?f=1&t=10218 |
Page 1 of 1 |
| Author: | Ryan [ Wed Jul 14, 2004 12:36 pm ] |
| Post subject: | NATHAN STYLE 52 BOILER TESTER |
I ran into an interesting peice of equipment. Self described as a Nathan Style 52 Boiler Tester. It has 3 large pipe connections. Two of them are controlled by valves at one end. While the other end has the third. In between there are another valve with a circular handle. Directly across is a small what looks like a relief valve. There is also a spring loaded dial that points to a "T" or a "W" I believe this may describe test or working pressure? If any of you have seen one of these in an old roundhouse or any technical information in a Nathan book/ catalog or tech manual I would enjoy hearing about any information you may have. Thanks |
|
| Author: | buddy bob [ Wed Jul 14, 2004 8:03 pm ] |
| Post subject: | Re: NATHAN STYLE 52 BOILER TESTER |
> I ran into an interesting peice of > equipment. Self described as a Nathan Style > 52 Boiler Tester. It has 3 large pipe > connections. Two of them are controlled by > valves at one end. While the other end has > the third. In between there are another > valve with a circular handle. Directly > across is a small what looks like a relief > valve. There is also a spring loaded dial > that points to a "T" or a > "W" I believe this may describe > test or working pressure? If any of you have > seen one of these in an old roundhouse or > any technical information in a Nathan book/ > catalog or tech manual I would enjoy hearing > about any information you may have. > Thanks Hi The t is for test ie high press. low vol. W is for washout high vol. low press. I hope that answers your question. regards bb |
|
| Author: | Ryan [ Wed Jul 14, 2004 8:19 pm ] |
| Post subject: | Re: NATHAN STYLE 52 BOILER TESTER |
> Hi The t is for test ie high press. low vol. > W is for washout high vol. low press. I hope > that answers your question. regards bb Thanks for your response, do you know of any documented instructions for these, for example catalag etc? Where did you obtain yours? thanks Bob, Ryan |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|