Railway Preservation News
https://www.rypn.org/forums/

Steam Locomotive Notes
https://www.rypn.org/forums/viewtopic.php?f=1&t=10306
Page 1 of 1

Author:  Doug Bailey [ Thu Jul 22, 2004 8:42 am ]
Post subject:  Steam Locomotive Notes

When we put steamlocomotive.info together, we thought that the 'Notes' system we'd implemented would be useful in conveying individuals knowledge of various steam locomotives, and in a sense, I suppose it has been. Almost 2000 notes have been posted in the 18 months we've been operating.

Anyhow, one problem, as I see it, is that while these notes are interesting and informative and newsy, very few people actually see them, because it requires you to first browse to the locomotive in question, then click the notes button. So, we implemented a new feature. The last 30 notes posted can be read. The link that does this is in the Library section, or you can follow the link below. Some pretty neat information gets conveyed in these notes.

Doug


Steam Locomotive Notes
dougb@sunserver.com

Author:  Joshua K. Blay [ Thu Jul 22, 2004 9:25 am ]
Post subject:  Re: Steam Locomotive Notes

Thanks Doug. I just posted a note on CPR 2929. Its still in PA.

Joshua

Author:  Rob Davis [ Thu Jul 22, 2004 11:46 am ]
Post subject:  NYC 0-6-0 in Utica

Joshua,

Where did the 0-6-0 in Utica come from before being plinthed where she is now?

Rob



trains@robertjohndavis.com

Author:  Jim Lundquist [ Thu Jul 22, 2004 11:50 am ]
Post subject:  Re: Steam Locomotive Notes

Great web site. I note that California leads the way with 212 steam locomotives and Maine has the least with 1.

Jim@psrm.org

Author:  Don Wirth [ Thu Jul 22, 2004 12:13 pm ]
Post subject:  Re: NYC 0-6-0 in Utica

The notes on this engine states that it has 58" drivers. That's pretty high drivers for an 0-6-0.

frisco1522@sbcglobal.net

Author:  Joshua K. Blay [ Thu Jul 22, 2004 12:39 pm ]
Post subject:  NYC 0-6-0 in Utica

Ohio!

http://www.steamlocomotive.info/vowners ... isplay=935



INFO

Author:  James Hefner [ Thu Jul 22, 2004 12:41 pm ]
Post subject:  Re: Steam Locomotive Notes

Very nice; you are doing a great job, Doug. Thank you for all of your hard work.

-James Hefner
Hebrews 10:20a


Surviving World Steam Project
james@survivingworldsteam.com

Author:  EDM [ Thu Jul 22, 2004 3:17 pm ]
Post subject:  Re: NYC 0-6-0 in Utica

Wasn't there (isn't there) an NYC 0-6-0 in Hagerstown, MD? Not a lot of NYC steam engines around, thats for sure.

> Ohio!

>
> http://www.steamlocomotive.info/vowners ... isplay=935


edm5970@earthlink.net

Author:  Alexander D. Mitchell IV [ Thu Jul 22, 2004 3:26 pm ]
Post subject:  Re: Steam Locomotive Notes

> Great web site. I note that California leads
> the way with 212 steam locomotives and Maine
> has the least with 1.

Let's see...... Belfast & Moosehead Swedish 4-6-0..... two steamers up in Allagash Wilderness..... WW&F 9 and 10, Maine NG RR has about 3 or 4...... MEC 470...........

Methinks someone can't count. <:-)


LNER4472@bcpl.net

Author:  Alexander D. Mitchell IV [ Thu Jul 22, 2004 5:12 pm ]
Post subject:  Re: NYC 0-6-0 in Utica

> Wasn't there (isn't there) an NYC 0-6-0 in
> Hagerstown, MD? Not a lot of NYC steam
> engines around, thats for sure.

Still there, slowly enduring conversion to ferrous oxide (or is it ferric?).


LNER4472-NOSPAM-@bcpl.net

Author:  mike La [ Sat Jul 24, 2004 12:45 am ]
Post subject:  Re: NYC 0-6-0 in Utica

> Still there, slowly enduring conversion to
> ferrous oxide (or is it ferric?).

The engine in Hagerstown ,0-6-0 6894 is b-10w

class switcher. The b-11k in Utica 6721 is
I guess a cousin. BTW, my tape measure read
56" when I measured the drivers. You will find
conflicting spec's in a number of places.

Our local chapter(U&MV)nrhs acquired the engine from the Carrilon Historical Park in
Dayton,Oh in 1999. We believe it was last under
steam in 1956.

dmzlalo@aol.com

Author:  Don C. [ Mon Jul 26, 2004 10:24 am ]
Post subject:  What is the REAL driver diameter

> Very nice; you are doing a great job, Doug.
> Thank you for all of your hard work.

> -James Hefner
> Hebrews 10:20a

Doug has done a very good job of compiling and maintaining the information on his site. I have one question though, what is the actual driver diameter of LS&I 2-8-0s #18 through #24? The site lists the sizes as follows:
#18 - 55"
#19 - 56"
#20 - 56"
#21 - 54"
#22 - 52"
#23 - 53"
#24 - 57"

And does #29 only have 50" drivers? Inquring minds want to know......

Don C.

milw261@sbcglobal.net

Author:  Jim Montague [ Sat Aug 14, 2004 5:53 pm ]
Post subject:  NYC 0-6-0 in Hagerstown

Who owns the 6894? Is it part of the Hagerstown Roundhouse Museum? Is it on display or hidden away somewhere?

NYC 6894

Author:  John Bohon [ Sat Aug 14, 2004 7:19 pm ]
Post subject:  Re: NYC 0-6-0 in Hagerstown

> Who owns the 6894? Is it part of the
> Hagerstown Roundhouse Museum? Is it on
> display or hidden away somewhere?

Unless something has changed fairly recently the 6894 is privately owned. It is not on display and the last time I saw it was sitting on one of the service tracks that lead to the turntable and roundhouse. In the mid seventies the engine was pretty complete, mostly just missing the gages. Unfortunately it has now been stripped of quite a few of the smaller parts such as injectors. I do not know if they were removed by the owner.

The 6894 is a good looking 0-6-0 that deserves a better fate. I hope someone rescues her someday.

John Bohon

jhbohon@yahoo.com

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/