Finally found the page I was looking for, most searches turned up nutritional suppliments. Here is the page of whistles available from multipower international. I was wondering if their brass whistles suffered from the same quality control problems as the cast iron ones?

Multipower Whistles

We have a new plant producing these whistles. We have cut off relations with our old plant due to the aforementioned quality control issues.

I can take some detailed pictures of the brass whistles if you want.

Let me know

-Benjamin
sales@multipowerinternational.com

http://www.multipowerinternational.com
sales@multipowerinternational.com

> We have a new plant producing these
> whistles. We have cut off relations with our
> old plant due to the aforementioned quality
> control issues.

> I can take some detailed pictures of the
> brass whistles if you want.

> Let me know

> -Benjamin
> sales@multipowerinternational.com

You should also post some downloadable Mp3's or wavs.



superheater62@yahoo.com

> We have a new plant producing these
> whistles. We have cut off relations with our
> old plant due to the aforementioned quality
> control issues.

> I can take some detailed pictures of the
> brass whistles if you want.

> Let me know

I also wanted to know input thread size and minimum psi required. I think we have enough at 150psi, but what is minimum. We operate a steam traction engine weekends during the summer, and a chime whistle would be a nice addition, but the cast iron ones can be up to 70lbs, and a little hefty to put on and remove while on a ladder. That's me at the controls.

> -Benjamin
> sales@multipowerinternational.com