It is currently Sat Aug 15, 2026 11:05 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 5 posts ] 
Author Message
 Post subject: Texas Transportation Co.
PostPosted: Mon Jan 24, 2005 3:29 pm 

Joined: Wed Aug 25, 2004 3:59 am
Posts: 64
Location: Allentown, PA
Does anyone have any knowledge of what has happened to the electric steeple cab locomotives used at the Pearl Brewery in Texas? Are they still in Texas somewhere or have they been moved? I recall that the brewewry had closed and that there was a fire in polant sometime after that.

Any updates would be appreicated. Thanks

Joel


Offline
 Profile  
 
 Post subject: Re: Texas Transportation Co.
PostPosted: Tue Jan 25, 2005 2:59 pm 

Joined: Sun Aug 22, 2004 7:25 pm
Posts: 2559
Location: The Atlantic Coast Line
The Preserved North American Electric Cars Roster lists these cars as "stored, operable".

Wesley


Offline
 Profile  
 
 Post subject: Re: Texas Transportation Co.
PostPosted: Tue Jan 25, 2005 3:54 pm 

Joined: Thu Nov 25, 2004 11:35 am
Posts: 332
Location: Cortez, CO 81321
Joel said, "... the electric steeple cab locomotives used at the Pearl Brewery in Texas ..."


Hi,

I have no idea what happened to these units but I do have 18 prints that show motors No. 1 (1), No. 1 (2), No. 2 (1), and No. 2 (2), some black and white, some color.

I no longer have any interest in this railroad , so if anyone is interested in these shots, let's make a deal.

Roger, caboose9@charter.net

_________________
S. Roger Kirkpatrick, Cortez, CO - Gateway to Mesa Verde National Park


Offline
 Profile  
 
 Post subject: Re: Texas Transportation Co.
PostPosted: Wed Jan 26, 2005 8:58 pm 

Joined: Sun Aug 22, 2004 4:46 pm
Posts: 76
Location: mount dora, florida
The two electric locomotives are still stored at the Pearl Brewery SA, Tx.
As far as I know they are operable.


Offline
 Profile  
 
 Post subject: Re: Texas Transportation Co.
PostPosted: Thu Jan 27, 2005 8:45 pm 

Joined: Tue Dec 14, 2004 5:45 pm
Posts: 297
The ex-Texas Electric was operable. I don't know that they got the steeplecab running again after it was flooded out a few years back. It had a reverser go out and I don't think they re-wired it correctly.

The thing would barely move in notch one and then would spin the wheels in notch two. The controller acted the same way regardless of which set of motors were cut-out. After noticing that, I reached down and CUT OUT ALL THE MOTORS and still... barely moved in notch one and then spun the wheels in notch two!

_________________
Andy Nold


Offline
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 5 posts ] 

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: