| Railway Preservation News https://www.rypn.org/forums/ |
|
| Looking for Flag Brackets https://www.rypn.org/forums/viewtopic.php?f=1&t=17555 |
Page 1 of 1 |
| Author: | Geoff Maits [ Wed May 25, 2005 1:22 pm ] |
| Post subject: | Looking for Flag Brackets |
I am looking for flag brackets or holders that will fit in the brackets for Marker lights that are mounted on Passenger cars/caboose. Any help locating some would be appreciatedThanksGeoff |
|
| Author: | Randy Hees [ Wed May 25, 2005 5:15 pm ] |
| Post subject: | Re: Looking for Flag Brackets |
The SPCRR has a pattern for a marker lamp bracket. It is a two part casting meant to be mortised into the corner casting of a wooden passenger car. Its based on a part used by the Carter Brothers on the narrow gauge cars they built, but very similar parts were used by SP as well.This is one of about 300 patters in the SPCRR collection. |
|
| Author: | SZuiderveen [ Wed May 25, 2005 7:19 pm ] |
| Post subject: | Re: Looking for Flag Brackets |
Highly overpriced, but available from the OEM.http://store.yahoo.com/adlake/270marlammou.htmlSteve Zuiderveen |
|
| Author: | Jerry Huck [ Thu May 26, 2005 11:00 am ] |
| Post subject: | Re: Looking for Flag Brackets |
Randy,Could you send info and maybe a picture of the brackets to me?We need a set like that for SVRy caboose #3.Thanks...... Jerrylmcx@eoni.com |
|
| Author: | Catalpa [ Fri May 27, 2005 8:08 am ] |
| Post subject: | Re: Looking for Flag Brackets |
I just picked up a pair of "flat mount" brackets from a locomotive scrap operation. They came with a 6" x 6" piece of CSX cabside still bolted to each. You might check with some place like Larry's Electric in Youngstown and see if they could provide them.G.F.PayneBaltimore MD |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|