It is currently Tue Aug 25, 2026 11:56 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 2 posts ] 
Author Message
 Post subject: One Shot sign paint going Lead Free?
PostPosted: Mon Jun 06, 2005 11:05 pm 

Joined: Mon Aug 23, 2004 12:37 pm
Posts: 451
Location: Missoula MT
I picked this up off the LETPRESS List (a bulletin board for printers who use letterpress--lead type and all. Given the popularity of this paint it would be good to know if this is actually happening. Does anybody know for sure?Michael SeitzMissoula MT> On Jun 3, 2005, at 11:53 PM, Ron Peterson wrote:>>> The opportunity for a new thread concerning lead is just too>> tempting. Especially for a letterpress museum that probably melts>> lead and generates the dreaded "lead fumes". But not to worry, I>> just ordered a few sign painters "quills", otherwise known as long>> bristle brushes (french squirrel hair) I think. But I digress.>> Included in the order was the info that very soon if not already, all>> One Shot sign paint will be lead free. Literature went on to say that>> the only pricing affected will be the ones that contained lead and>> they will be going UP. Cited gov't hassles and regulations. So if>> you want the good stuff, look for Old Stock. It is great paint as it>> should be with prices for some colors exceeding $125 per gallon.>>>> Ron Peterson>> George Gordon Press>> Eugene, Oregon>


Offline
 Profile  
 
 Post subject: Re: One Shot sign paint going Lead Free?
PostPosted: Mon Jun 06, 2005 11:33 pm 
Site Admin

Joined: Sat Aug 28, 2004 1:15 pm
Posts: 1502
Location: Henderson Nevada
I am not surprised, but am sorry.We use One Shot for our lettering. It weathers like lead based paints (as expected) streaking down the car side as it chalks and washes down.As I understand it, lead is not illegal, but is being litigated out of existence. The same applies to asbestos. I need to reline a Plymouth loco clutch, which needs asbestos for the correct friction. And asbestos fibers from clutches are not considered dangerous, since they are ground too fine to be dangerous.... but asbestos is too dangerous to be sold...I have located a tractor shop which still will reline with asbestos, I can match colors without lead, but will miss the washing down as the car and lettering weathers. Side note: Before striping old paint we test for lead, and take precautions. We don’t allow the young around (the effect of lead is especially significant when the brain is developing) We are not arrogant, but understand the old materials and use them when possible...

_________________
Randy Hees
Director, Nevada State Railroad Museum, Boulder City, Nevada, Retired
http://www.nevadasouthern.com/
https://www.facebook.com/FriendsOfNevadaSouthernRailway


Offline
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 2 posts ] 

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: