| Railway Preservation News https://www.rypn.org/forums/ |
|
| New Climax boiler https://www.rypn.org/forums/viewtopic.php?f=1&t=18644 |
Page 1 of 1 |
| Author: | bobyar2001 [ Fri Sep 30, 2005 8:17 pm ] |
| Post subject: | New Climax boiler |
For White Mountain Central's Climax locomotive:http://photos.nerail.org/showpic/?photo=2005091719583912914.jpg&bydate%3A82 |
|
| Author: | Dennis Daugherty [ Fri Sep 30, 2005 11:26 pm ] |
| Post subject: | Re: New Climax boiler |
Would be interesting to know the builder and the cost. Also are any of the sheets flanged or all "square corners" |
|
| Author: | chairman3108 [ Sat Oct 01, 2005 10:48 pm ] |
| Post subject: | Re: New Climax boiler |
And here is some news on a not-so-new climax boiler currently back in the States for overhaulhttp://climax.puffingbilly.com.au/Cl_Proj_2.htm |
|
| Author: | Robert Yuill [ Sun Oct 02, 2005 9:27 am ] |
| Post subject: | Re: New Climax boiler |
It appears that the backhead is not flanged with a radius, as usual, but with an 45 degree. Or is there something under the shrink wrap that gives this illusion? |
|
| Author: | Robert Yuill [ Sun Oct 02, 2005 9:28 am ] |
| Post subject: | Re: New Climax boiler |
It appears that the backhead is not flanged with a radius, as usual, but with an 45 degree. Or is there something under the shrink wrap that gives this illusion? |
|
| Author: | Finderskeepers [ Mon Oct 03, 2005 2:49 pm ] |
| Post subject: | Re: New Climax boiler |
Dennis Daugherty wrote: Would be interesting to know the builder and the cost. Also are any of the sheets flanged or all "square corners" I'm going to assume if it came from Canada, it came from these folks, they built our boiler too.http://www.boilersmith.com/as to what it cost to build I can only guess.
|
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|