New Climax boiler

bobyar2001 · **Posted:** Fri Sep 30, 2005 8:17 pm

For White Mountain Central's Climax locomotive:http://photos.nerail.org/showpic/?photo=2005091719583912914.jpg&bydate%3A82

Dennis Daugherty · **Joined:** Tue Sep 13, 2005 9:54 pm **Posts:** 106

Would be interesting to know the builder and the cost. Also are any of the sheets flanged or all "square corners"

chairman3108 · **Posted:** Sat Oct 01, 2005 10:48 pm

And here is some news on a not-so-new climax boiler currently back in the States for overhaulhttp://climax.puffingbilly.com.au/Cl_Proj_2.htm

Robert Yuill · **Posted:** Sun Oct 02, 2005 9:27 am

It appears that the backhead is not flanged with a radius, as usual, but with an 45 degree. Or is there something under the shrink wrap that gives this illusion?

Robert Yuill · **Posted:** Sun Oct 02, 2005 9:28 am

It appears that the backhead is not flanged with a radius, as usual, but with an 45 degree. Or is there something under the shrink wrap that gives this illusion?

Finderskeepers · **Posted:** Mon Oct 03, 2005 2:49 pm

Dennis Daugherty wrote:

Would be interesting to know the builder and the cost. Also are any of the sheets flanged or all "square corners"

I'm going to assume if it came from Canada, it came from these folks, they built our boiler too.http://www.boilersmith.com/as to what it cost to build I can only guess.