It is currently Wed Sep 30, 2026 2:51 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Eureka mystery location
PostPosted: Sun Nov 13, 2005 5:21 pm 

Joined: Sun Aug 22, 2004 9:35 am
Posts: 8139
Location: Wilton, NY
Dan Markoff's beautiful Eureka, but at what location? I don't recognize it.http://abpr.railfan.net/abprphoto.cgi?m ... enColl.jpg


Offline
 Profile  
 
 Post subject: Re: Eureka mystery location
PostPosted: Sun Nov 13, 2005 6:08 pm 

Joined: Mon Oct 11, 2004 8:24 pm
Posts: 283
Location: New Jersey
I think that is at Rail Fair in Sacramento. I might be wrong though.

_________________
Eric Bolton
Superintendent/Owner
East Tigard & Southern RR Co.


Offline
 Profile  
 
 Post subject: Re: Eureka mystery location
PostPosted: Sun Nov 13, 2005 6:40 pm 

Joined: Thu Aug 26, 2004 2:53 pm
Posts: 660
Eric's right - Railfair '91.If I can find it, I'll scan the slide I took of both Eurekas together - the original, and a live-steam miniature replica.JAC


Offline
 Profile  
 
 Post subject: Re: Eureka mystery location
PostPosted: Mon Nov 14, 2005 12:33 am 

Joined: Wed Nov 09, 2005 12:44 am
Posts: 35
Location: San Carlos
Yes, looks like old sac, by the CP train shed.

_________________
John Goldie
San Carlos CA


Offline
 Profile  
 
 Post subject: Re: Eureka mystery location
PostPosted: Mon Nov 14, 2005 2:39 pm 

Joined: Sun Dec 26, 2004 10:13 pm
Posts: 356
Location: Brooklyn, NY
Quote:
If I can find it, I'll scan the slide I took of both Eurekas together - the original, and a live-steam miniature replica.
If it was 15" gauge, it was not a rendition of the "Eureka" but rather the North Pacific Coast #12 "Sonoma" which is on display inside the museum (another of the three 'surviving members' of its class, the third being the former Santa Cruz Railway #3 "Jupiter"). CSRM also now has the 15" as it was donated last year after the death of its builder, Frank Allen. The Orland Newville & Pacific in Glenn County, CA, the railroad built for this locomotive to run on when completed in '91, continues to run with a diesel locomotive out of the restored (and relocated) SP depot in Orland. A Sac. Shops-built Consol. is on display nearby as well.Image


Offline
 Profile  
 
 Post subject: Re: Eureka location - when and where
PostPosted: Tue Nov 15, 2005 1:46 am 

Joined: Sun Aug 22, 2004 8:51 pm
Posts: 2055
Location: Southern California
The location is in Old Sacramento in front of the replica CP station. The track is temporary and laid on top of the pavement; that makes it during the 1991 10th anniversary of CSRM. There is now permanent dual gauge track at that location.It is also the first public outing of the Eureka after its restoration. The paint was barely dry when it was loaded upon the low-boy trailer for the trip to Sacramento. That is why Dan Markoff is asking for an extension to the FRA 15-year rule. He babies the engine. There was a discussion a couple of months ago about this on the ng discussion board.I remember watching it being unloaded and talking to Betty Kimball, Ward Kimball's wife, as we both leaned against the CP station building. Betty said that they had seen the engine when it was at Hobart Estate while they were on their honeymoon trip. They were smitten by it; but as a young couple they were unable to consider obtaining the locomotive. So a few years later they bought Nevada Central #2 which became their Grizzly Flates RR #2.

_________________
Brian Norden


Offline
 Profile  
 
 Post subject: Re: Eureka mystery location
PostPosted: Tue Nov 15, 2005 12:08 pm 

Joined: Thu Aug 26, 2004 2:53 pm
Posts: 660
Ed Kelley wrote:
If it was 15" gauge, it was not a rendition of the "Eureka" but rather the North Pacific Coast #12 "Sonoma"
That's probably it.JAC


Offline
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: