| Railway Preservation News https://www.rypn.org/forums/ |
|
| SP&S #539 moving from Battle Ground, WA https://www.rypn.org/forums/viewtopic.php?f=1&t=21099 |
Page 1 of 1 |
| Author: | pnwr1853 [ Thu Aug 03, 2006 11:01 pm ] |
| Post subject: | SP&S #539 moving from Battle Ground, WA |
Well, yesterday went extrealmy well. She crossed the road at 12PM with almost no problems. My photos have been posted. Follow the link. Now the real work on the 539 can begin. http://www.pbase.com/pnwr1853/aug_02_2006 Here are links to the photos taken on Saturday, which is when the first move from the 539 was made. 2 of have posted photos. Jeff Davis> http://www.pbase.com/pnwr1853/july_29_2006 Kyle Weismann-Yee> http://www.pbase.com/kentonline/july_29 If all goes to plan, she will hopefully be running by the end of the year. Jeff Davis |
|
| Author: | John Bohon [ Sun Aug 06, 2006 1:02 pm ] |
| Post subject: | Re: SP&S #539 moving from Battle Ground, WA |
If you hope to have the 539 running by the end of the year I assume you are well past the teardown phase and have done the form 4 work. It also goes without saying that the locomotive is in reasonably good condition. Can you give us a short review of the jobs you still must complete and an idea of how many people you have working on the project? Good work and thank you in advance for any information you can share. John Bohon |
|
| Author: | Brian Fleming [ Sun Aug 06, 2006 4:53 pm ] |
| Post subject: | Re: SP&S #539 moving from Battle Ground, WA |
John, Thanks for your intrest in the 539's progress, but to answer your question the majority of the work to do is replace a couple hundred flexable staybolts caps and sleaves, finish disassebling the running gear clean repair as needed and reassemble, instal the new 2.25" tubes hydro, lag paint, fire up. Brian Fleming |
|
| Author: | Dave Lewandoski [ Sun Aug 06, 2006 8:41 pm ] |
| Post subject: | Re: SP&S #539 moving from Battle Ground, WA |
great pics, thanks for sharing. Where can I find out more? Thanks again |
|
| Author: | whodom [ Mon Aug 07, 2006 5:26 am ] |
| Post subject: | Re: SP&S #539 moving from Battle Ground, WA |
Interesting locomotive. That's the only U.S. locomotive I've seen that still has extended piston rods. These were common in Europe, but seem to have been used for only a short time here. |
|
| Author: | Txhighballer [ Mon Aug 07, 2006 2:51 pm ] |
| Post subject: | Re: SP&S #539 moving from Battle Ground, WA |
Brian: I assume you have not yet done the ultrasound on the boiler yet.Also,what are the plans for operating the 539? |
|
| Author: | John Bohon [ Mon Aug 07, 2006 8:23 pm ] |
| Post subject: | Re: SP&S #539 moving from Battle Ground, WA |
Brian, You mention the 2.25 inch tubes. Does that mean the superheater flues are already installed? It also sounds like the superheaters are ready to go back in. Is that the case? I am just curious and am rapidly getting more interested in this restoration. Thanks again for any information you can provide. John Bohon |
|
| Author: | Brian Fleming [ Tue Aug 08, 2006 10:14 am ] |
| Post subject: | Re: SP&S #539 moving from Battle Ground, WA |
All ultrasound work of areas of concern has taken place has been performed, and the grid pattern ultrasound for the formal form 4 calculations will take place over the next couple of weeks. I intend to leave the super-heater flues in the locomotive the hav passed our non distructive testing, we have not yet hydro tested the super-heater elements but they look good I don't think we will have any real problems with them but if we do we will deal with it. As a side note photos of this locomtive in service as SP&S 536 or NP 1762. Brian Fleming |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|