Railway Preservation News
https://www.rypn.org/forums/

Turntable
https://www.rypn.org/forums/viewtopic.php?f=1&t=2113
Page 1 of 1

Author:  Dave Wantz [ Sun Sep 16, 2001 10:00 pm ]
Post subject:  Turntable

If anyone is interested; there is a turntable approximately 80+ feet that could be availiable at the BEHR Iron and Steel scrapyard in Rockford, Il
They were going to use it for a bridge and have most likely removed the end wheels and center bearing, but these could be replaced if the price was right. Anyone interested should arrainge to see the table and may contact a Jim Barbagallo at 815-987-2755 or email JBARBAGALO@AOL.COM
I only happened to see the table over the fence and got the above information and have no interest in the table or the scrapyard whatsoever.

fwantz@pressenter.com

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/