| Railway Preservation News https://www.rypn.org/forums/ |
|
| Looking for Cast Washers https://www.rypn.org/forums/viewtopic.php?f=1&t=21370 |
Page 1 of 1 |
| Author: | oermsam [ Mon Sep 25, 2006 8:27 pm ] |
| Post subject: | Looking for Cast Washers |
Looking for a supplier or borrow a pattern for the old style thrust washers. For example a 1/2" id washer would be 1" on "top" surface and taper to 2+" on the bottom, and would be about 1/2" thick. The were used everywhere. However, can not find a supplier for anything like these. Thanks |
|
| Author: | Mikechoochoo [ Sat Sep 30, 2006 6:59 pm ] |
| Post subject: | Re: Looking for Cast Washers |
Are these what you're looking for ? http://www.lawlermfg.com/prod-ogee.htm http://www.portlandbolt.com/products/wa ... asher.html |
|
| Author: | oermsam [ Sun Oct 01, 2006 12:27 am ] |
| Post subject: | Re: Looking for Cast Washers |
Those are it. I was told they were C.I. washers. thanks |
|
| Author: | Martyhuck [ Sun Oct 01, 2006 11:22 am ] |
| Post subject: | Re: Looking for Cast Washers |
Try Mc-Master - Carr. They have a website -www.mcmaster.com - search for structural washers. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|