| Railway Preservation News https://www.rypn.org/forums/ |
|
| LFM plant https://www.rypn.org/forums/viewtopic.php?f=1&t=21635 |
Page 1 of 1 |
| Author: | bobyar2001 [ Mon Nov 06, 2006 11:50 am ] |
| Post subject: | LFM plant |
Postcard of this foundry in Atchison, Kansas, which made those odd disc drivers under rebuilt Santa Fe 4-6-2s and 4-6-4s, and (I think) Blomberg EMD trucks: http://cgi.ebay.com/1940s-POSTCARD-LOCO ... otohosting Wjen I went through there about a dozen years ago, it looked like most of these buildings were standing and in use. |
|
| Author: | BILL [ Mon Nov 06, 2006 2:28 pm ] |
| Post subject: | Re: LFM plant |
They were still there about a month ago. I take it this was the source of all the castings marked "ATSF Atcheson" I have seen over the years? Thanks for posting it. |
|
| Author: | Topfuel [ Tue Nov 07, 2006 3:11 pm ] |
| Post subject: | Re: LFM plant |
This company is currently known as Atchison Castings and is still in business. As far as I know, they may be the only other U.S. company (besides Columbus Castings - the former Buckeye Steel Castings Corp. in Columbus, Ohio) that is still equipped to produce large castings such as RR car trucks. |
|
| Author: | Catalpa [ Tue Nov 07, 2006 4:13 pm ] |
| Post subject: | Re: LFM plant |
Atchison, or at least the company currently doing business as Atchison, did the truck frame casting for the latest round of Metra diesels, Metra Sumitomo gallery cars, and the VRE Sumitomo gallery cars currently under production. |
|
| Author: | Txhighballer [ Tue Nov 07, 2006 4:26 pm ] |
| Post subject: | Re: LFM plant |
When I was a member of ASTA,we contacted them about furninshing drawings for a new cylinder saddle,since they had made the previous one. Unfortunatly,many of their steam drawings were destroyed on a flood some years ago. They still might have more but if anyone is in need,contact them. |
|
| Author: | Brian Norden [ Tue Nov 07, 2006 10:38 pm ] |
| Post subject: | Re: LFM plant |
Here is a link to the page for Atchison Steel Casting & Machine. Note the illustrations of railroad trucks. http://www.americasttech.com/sub_atchison.asp It is a subsidiary of AmeriCast Technologies, Inc. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|