| Railway Preservation News https://www.rypn.org/forums/ |
|
| Ontario steam https://www.rypn.org/forums/viewtopic.php?f=1&t=22221 |
Page 1 of 1 |
| Author: | bobyar2001 [ Tue Jan 16, 2007 11:36 pm ] |
| Post subject: | Ontario steam |
Some recent photos of steam in Ontario on Trainorders: http://www.trainorders.com/discussion/r ... 10,1319618 You have to be a member to enlarge them, but it looks like TH&B 103 has had some work recently. |
|
| Author: | k5ahudson [ Wed Jan 17, 2007 12:17 am ] |
| Post subject: | Re: Ontario steam |
Some good shots of the restoration process here.... http://home.mountaincable.net/~chuckd/103repairs1.htm |
|
| Author: | bobyar2001 [ Wed Jan 17, 2007 8:18 am ] |
| Post subject: | Soda blasting question |
That is an impressive job and a nice website explaining what they did. I note that they are working on getting a building for the engine, most important if they don't want to start over in 7-8 years. Good to see them working on proper details like the boiler jacket and cab interior items. One question on soda blasting. Does it leave grit like sandblasting that can get into bearings, or is it relatively harmless? Does it require extensive protection of moving surfaces like sandblasting does? |
|
| Author: | k5ahudson [ Wed Jan 17, 2007 11:38 pm ] |
| Post subject: | Re: Soda blasting question |
bobyar2001 wrote: One question on soda blasting. Does it leave grit like sandblasting that can get into bearings, or is it relatively harmless? Does it require extensive protection of moving surfaces like sandblasting does?
Soda is increasing in popularity for railroad preservation just for the reason you mentioned. It isn't as abrasive as sand, so the job usually takes a bit longer, but it is much easier on the bearings. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|