Railway Preservation News
https://www.rypn.org/forums/

*AHEM* Brother Weaver? . . .
https://www.rypn.org/forums/viewtopic.php?f=1&t=22394
Page 1 of 2

Author:  johnacraft [ Thu Feb 08, 2007 8:32 am ]
Post subject:  *AHEM* Brother Weaver? . . .

Such shocking disrespect for authenticity! A plastic cup and ketchup bottle?

Image


STYROFOAM tableware? Barcode on the non-vintage pickle jar?

Image

Really, sir.

;)

JAC

Author:  Erik Ledbetter [ Thu Feb 08, 2007 9:55 am ]
Post subject:  Re: *AHEM* MISTER Weaver? . . .

"Substitution of modern materials that offer advantages of economy, availability, or reduced maintenance costs shall be considered where such materials can be introduced without fundamentally altering the essential character of the experience to be interpreted."

--Pontificator, John Q., "Crumbs in the Crummy: An Epistemological Approach to the Preservation and Interpretation of the Culinary Arts As Practiced by Historic Transportation Workers in Early 20th Century North America," Dapheted City: Emperor of the North University Press, 2003, p. iv.

Author:  wesp [ Thu Feb 08, 2007 12:05 pm ]
Post subject:  Re: *AHEM* MISTER Weaver? . . .

Erik,

BRAVO! Take a bow.

Wesley

Author:  rev66vette [ Thu Feb 08, 2007 12:34 pm ]
Post subject:  Re: *AHEM* MISTER Weaver? . . .

Good one!!! BTW: Is that chili or pork and beans???????????

Hmmm...........

Author:  johnacraft [ Thu Feb 08, 2007 12:55 pm ]
Post subject:  Re: *AHEM* MISTER Weaver? . . .

Erik Ledbetter wrote:
"Substitution of modern materials that offer advantages of economy, availability, or reduced maintenance costs shall be considered where such materials can be introduced without fundamentally altering the essential character of the experience to be interpreted."

--Pontificator, John Q., "Crumbs in the Crummy: An Epistemological Approach to the Preservation and Interpretation of the Culinary Arts As Practiced by Historic Transportation Workers in Early 20th Century North America," Dapheted City: Emperor of the North University Press, 2003, p. iv.


Somebody veddy funny. Is the "Emperor of the North University" anywhere near the University of Southern North Dakota at Hoople?


(Just for that, you get to be the one who buys the enamelware for next time.)

JAC

Author:  Erik Ledbetter [ Thu Feb 08, 2007 1:07 pm ]
Post subject:  Re: *AHEM* MISTER Weaver? . . .

johnacraft wrote:
Is the "Emperor of the North University" anywhere near the University of Southern North Dakota at Hoople?


It's in Daphetid City, just west of Gore. It was founded by a nondenominational group of socialists, labor organizers, and free-love radicals in counterpoint to Macalester College, Hamline University, the College of St. Thomas, Carlton College, and other J.J. Hill-sponsored pro-management agitprop fronts masquerading as institutions of higher education in Minnesota and the greater Northwest.

Look for the statue of their founder, noted 19th C Brotherhood of Railroad Trainmen organizer Steve Weaver, in the Daphetid City square. Weaver's the one in the fedora with the strike-breaking union soldier holding a bayonet to his tush.

I do hear that ENU and Hoople are great ice-fishing rivals, though.

Author:  Les Beckman [ Thu Feb 08, 2007 2:40 pm ]
Post subject:  Re: *AHEM* MISTER Weaver? . . .

Folks:

Great fun! Thanks for the "higher education!" But just for those of us that DON'T know, what caboose is this and where?

Les

Author:  johnacraft [ Thu Feb 08, 2007 2:50 pm ]
Post subject:  Re: *AHEM* MISTER Weaver? . . .

Les Beckman wrote:
Folks:

Great fun! Thanks for the "higher education!" But just for those of us that DON'T know, what caboose is this and where?

Les


http://rypn.sunserver.com/forum/viewtop ... 4290#84290

Image

JAC

Author:  Ted Krumreich [ Thu Feb 08, 2007 2:50 pm ]
Post subject:  Re: *AHEM* MISTER Weaver? . . .

The caboose is from the Strasburg Rail Road. Those gentlemen in the second picture are employees Chuck Trusdell and Scott Lefevre.

Author:  Les Beckman [ Thu Feb 08, 2007 3:58 pm ]
Post subject:  Re: *AHEM* MISTER Weaver? . . .

John and Ted -

Thanks much!

Les

Author:  Rovronr [ Thu Feb 08, 2007 5:01 pm ]
Post subject:  Re: How long is the extension cord?

When I worked on the C&NW we always admired the fact that DT&I crews had an outlet just inside the door where they could plug in a hotplate for their tasty morsels.
But we never could figure out how they dealt with the extension cords through switches and crossovers.
Nice.
Jim

Author:  scrmcurator [ Fri Feb 09, 2007 9:23 am ]
Post subject:  Re: How long is the extension cord?

Rovronr wrote:
When I worked on the C&NW we always admired the fact that DT&I crews had an outlet just inside the door where they could plug in a hotplate for their tasty morsels.
But we never could figure out how they dealt with the extension cords through switches and crossovers.
Nice.
Jim


They must have had a need for a lot of 56.5" extension cords.

Author:  S. Weaver [ Fri Feb 09, 2007 10:12 am ]
Post subject:  Re: *AHEM* MISTER Weaver? . . .

I admit to such shocking indiscretions from time to time ... I could plead the usual excuses - green crew; walking within a ten-mile radius of Walmart; not enough boiler coffee - but I'll fall on my sword and assure one and all it will not happen again. Long live enamel ware!

The comments of the esteemed Dr. Ledbetter notwithstanding, I was only a nondenominationalist for a short time, and usually was forwarded a bill for all amorous activity.

Author:  johnacraft [ Fri Nov 09, 2007 8:00 am ]
Post subject:  Re: *AHEM* MISTER Weaver? . . .

S. Weaver wrote:
I admit to such shocking indiscretions from time to time ... I could plead the usual excuses - green crew; walking within a ten-mile radius of Walmart; not enough boiler coffee - but I'll fall on my sword and assure one and all it will not happen again. Long live enamel ware!

The comments of the esteemed Dr. Ledbetter notwithstanding, I was only a nondenominationalist for a short time, and usually was forwarded a bill for all amorous activity.



Brother Weaver has made some improvements to his caboose recently . . .

But as yet he has not managed to procure a Bishop's Safety Coupling Knife. If any of you can help him find one, let him know.

Image

Image

Image

Image

Image

Image


Many thanks to Steve, Eric Armpriester, and Linn Moedinger.

JAC

Author:  Scott Turner [ Fri Nov 09, 2007 10:40 am ]
Post subject:  Don't miss these - Well worth a look

A great! series of shots, John. Thanks to all involved (there was obviously some serious thought and effort here) for putting 'em together.

But...

You really should've started a new thread with this. It looked like a software glitch'd pushed an old thread to the top, and I almost moved on before noting the addition at the end. Glad I didn't.

Scott

Page 1 of 2 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/