| Railway Preservation News https://www.rypn.org/forums/ |
|
| Psgr. Cut Lever Wanted https://www.rypn.org/forums/viewtopic.php?f=1&t=2339 |
Page 1 of 1 |
| Author: | Aarne H. Frobom [ Wed Dec 05, 2001 11:11 am ] |
| Post subject: | Psgr. Cut Lever Wanted |
We are applying modern couplers in place of the Sharons on a heavyweight passenger car, and would like to buy a set of passenger cut levers for it. We especially want the cast locking brackets that hold the keyed cut levers, for the left-hand corner as you face the end of the car. Ideally we would buy the entire left-hand cut levers and brackets from a 1950's Pullman-Standard lightweight. If you have cut up such a car and have these parts for sale, please e-mail me, or call Dennis Braid at the Steam Railroading Institute, at (517) 725-9464, or write M.S.T.R.P., Inc., P. O. Box 665, Owosso, MI 48867-0665. Thanks. We'll gladly trade one Sharon drawhead and yoke, only slightly bent. We would have two, but on this car we learned that you can pull a 7,000-ton train with Sharons, but not without some breakage. Aarne Frobom froboma@mdot.state.mi.us |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|