| Railway Preservation News https://www.rypn.org/forums/ |
|
| Governor for H10-44 at IRM https://www.rypn.org/forums/viewtopic.php?f=1&t=2389 |
Page 1 of 1 |
| Author: | Todd Jones [ Thu Dec 13, 2001 6:52 pm ] |
| Post subject: | Governor for H10-44 at IRM |
Here's the info on the governor we need at IRM for the Milwaukee #760, nee 1802, the first FM built; "WOODWARD Governor Type PG with pneumatic hydraulic speed control". Our serial # is 955435. The WG # is 362603. Gov. Speed 345 at Idle 910 at Overspeed trip Customers # 2990-592-0369. Internal Servo mechanism act as a load regulator. This information is off a H12-44, but it will also work. I'm told that most any Woodward pneumatic governor will work. (Please inform if this info is incorrect) These were applied to many locomotives built without multiple unit capability back in the day. We have two operable locos at IRM with these. The DRINW 121 (SW7) and ComEd 15 (SW1). I posted this as a new post as the contact request was was quite a ways down the list. Any help in locating one of these will be appreciated. Thanks, Todd Jones IRM Diesel Dept milw104c@charter.net |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|