It is currently Thu Aug 27, 2026 2:52 am

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 27 posts ]  Go to page 1, 2  Next
Author Message
 Post subject: *AHEM* Brother Weaver? . . .
PostPosted: Thu Feb 08, 2007 8:32 am 

Joined: Thu Aug 26, 2004 2:53 pm
Posts: 660
Such shocking disrespect for authenticity! A plastic cup and ketchup bottle?

Image


STYROFOAM tableware? Barcode on the non-vintage pickle jar?

Image

Really, sir.

;)

JAC


Last edited by johnacraft on Fri Nov 09, 2007 9:13 am, edited 1 time in total.

Offline
 Profile  
 
 Post subject: Re: *AHEM* MISTER Weaver? . . .
PostPosted: Thu Feb 08, 2007 9:55 am 

Joined: Thu Aug 19, 2004 2:19 pm
Posts: 1124
Location: Washington, D.C.
"Substitution of modern materials that offer advantages of economy, availability, or reduced maintenance costs shall be considered where such materials can be introduced without fundamentally altering the essential character of the experience to be interpreted."

--Pontificator, John Q., "Crumbs in the Crummy: An Epistemological Approach to the Preservation and Interpretation of the Culinary Arts As Practiced by Historic Transportation Workers in Early 20th Century North America," Dapheted City: Emperor of the North University Press, 2003, p. iv.

_________________
Erik Ledbetter
www.steamsafari.com


Last edited by Erik Ledbetter on Thu Feb 08, 2007 12:20 pm, edited 1 time in total.

Offline
 Profile  
 
 Post subject: Re: *AHEM* MISTER Weaver? . . .
PostPosted: Thu Feb 08, 2007 12:05 pm 

Joined: Sun Aug 22, 2004 7:25 pm
Posts: 2559
Location: The Atlantic Coast Line
Erik,

BRAVO! Take a bow.

Wesley


Offline
 Profile  
 
 Post subject: Re: *AHEM* MISTER Weaver? . . .
PostPosted: Thu Feb 08, 2007 12:34 pm 

Joined: Mon Aug 30, 2004 3:45 pm
Posts: 362
Good one!!! BTW: Is that chili or pork and beans???????????

Hmmm...........


Offline
 Profile  
 
 Post subject: Re: *AHEM* MISTER Weaver? . . .
PostPosted: Thu Feb 08, 2007 12:55 pm 

Joined: Thu Aug 26, 2004 2:53 pm
Posts: 660
Erik Ledbetter wrote:
"Substitution of modern materials that offer advantages of economy, availability, or reduced maintenance costs shall be considered where such materials can be introduced without fundamentally altering the essential character of the experience to be interpreted."

--Pontificator, John Q., "Crumbs in the Crummy: An Epistemological Approach to the Preservation and Interpretation of the Culinary Arts As Practiced by Historic Transportation Workers in Early 20th Century North America," Dapheted City: Emperor of the North University Press, 2003, p. iv.


Somebody veddy funny. Is the "Emperor of the North University" anywhere near the University of Southern North Dakota at Hoople?


(Just for that, you get to be the one who buys the enamelware for next time.)

JAC


Offline
 Profile  
 
 Post subject: Re: *AHEM* MISTER Weaver? . . .
PostPosted: Thu Feb 08, 2007 1:07 pm 

Joined: Thu Aug 19, 2004 2:19 pm
Posts: 1124
Location: Washington, D.C.
johnacraft wrote:
Is the "Emperor of the North University" anywhere near the University of Southern North Dakota at Hoople?


It's in Daphetid City, just west of Gore. It was founded by a nondenominational group of socialists, labor organizers, and free-love radicals in counterpoint to Macalester College, Hamline University, the College of St. Thomas, Carlton College, and other J.J. Hill-sponsored pro-management agitprop fronts masquerading as institutions of higher education in Minnesota and the greater Northwest.

Look for the statue of their founder, noted 19th C Brotherhood of Railroad Trainmen organizer Steve Weaver, in the Daphetid City square. Weaver's the one in the fedora with the strike-breaking union soldier holding a bayonet to his tush.

I do hear that ENU and Hoople are great ice-fishing rivals, though.

_________________
Erik Ledbetter
www.steamsafari.com


Offline
 Profile  
 
 Post subject: Re: *AHEM* MISTER Weaver? . . .
PostPosted: Thu Feb 08, 2007 2:40 pm 

Joined: Tue Aug 02, 2005 1:25 pm
Posts: 6482
Folks:

Great fun! Thanks for the "higher education!" But just for those of us that DON'T know, what caboose is this and where?

Les


Offline
 Profile  
 
 Post subject: Re: *AHEM* MISTER Weaver? . . .
PostPosted: Thu Feb 08, 2007 2:50 pm 

Joined: Thu Aug 26, 2004 2:53 pm
Posts: 660
Les Beckman wrote:
Folks:

Great fun! Thanks for the "higher education!" But just for those of us that DON'T know, what caboose is this and where?

Les


http://rypn.sunserver.com/forum/viewtop ... 4290#84290

Image

JAC


Offline
 Profile  
 
 Post subject: Re: *AHEM* MISTER Weaver? . . .
PostPosted: Thu Feb 08, 2007 2:50 pm 

Joined: Mon Aug 23, 2004 1:38 pm
Posts: 29
The caboose is from the Strasburg Rail Road. Those gentlemen in the second picture are employees Chuck Trusdell and Scott Lefevre.


Offline
 Profile  
 
 Post subject: Re: *AHEM* MISTER Weaver? . . .
PostPosted: Thu Feb 08, 2007 3:58 pm 

Joined: Tue Aug 02, 2005 1:25 pm
Posts: 6482
John and Ted -

Thanks much!

Les


Offline
 Profile  
 
 Post subject: Re: How long is the extension cord?
PostPosted: Thu Feb 08, 2007 5:01 pm 

Joined: Mon Aug 23, 2004 2:52 pm
Posts: 30
Location: Chicago
When I worked on the C&NW we always admired the fact that DT&I crews had an outlet just inside the door where they could plug in a hotplate for their tasty morsels.
But we never could figure out how they dealt with the extension cords through switches and crossovers.
Nice.
Jim

_________________
Jim Dyer.
Brakeman on the C&NW (Cheap And Nothing Wasted) 1966 thru 1969. Looking for news about Galena Div. then.


Offline
 Profile  
 
 Post subject: Re: How long is the extension cord?
PostPosted: Fri Feb 09, 2007 9:23 am 

Joined: Mon Aug 23, 2004 8:17 am
Posts: 614
Location: Taylors, SC
Rovronr wrote:
When I worked on the C&NW we always admired the fact that DT&I crews had an outlet just inside the door where they could plug in a hotplate for their tasty morsels.
But we never could figure out how they dealt with the extension cords through switches and crossovers.
Nice.
Jim


They must have had a need for a lot of 56.5" extension cords.

_________________
Matt Conrad -- scrmcurator@yahoo.com
Join the secret world of trains.
Feel the pleasure, touch the pain.
Drift into yesterday. --Jethro Tull


Offline
 Profile  
 
 Post subject: Re: *AHEM* MISTER Weaver? . . .
PostPosted: Fri Feb 09, 2007 10:12 am 

Joined: Sun Aug 22, 2004 7:23 am
Posts: 492
Location: Strasburg, PA
I admit to such shocking indiscretions from time to time ... I could plead the usual excuses - green crew; walking within a ten-mile radius of Walmart; not enough boiler coffee - but I'll fall on my sword and assure one and all it will not happen again. Long live enamel ware!

The comments of the esteemed Dr. Ledbetter notwithstanding, I was only a nondenominationalist for a short time, and usually was forwarded a bill for all amorous activity.

_________________
Steve


Offline
 Profile  
 
 Post subject: Re: *AHEM* MISTER Weaver? . . .
PostPosted: Fri Nov 09, 2007 8:00 am 

Joined: Thu Aug 26, 2004 2:53 pm
Posts: 660
S. Weaver wrote:
I admit to such shocking indiscretions from time to time ... I could plead the usual excuses - green crew; walking within a ten-mile radius of Walmart; not enough boiler coffee - but I'll fall on my sword and assure one and all it will not happen again. Long live enamel ware!

The comments of the esteemed Dr. Ledbetter notwithstanding, I was only a nondenominationalist for a short time, and usually was forwarded a bill for all amorous activity.



Brother Weaver has made some improvements to his caboose recently . . .

But as yet he has not managed to procure a Bishop's Safety Coupling Knife. If any of you can help him find one, let him know.

Image

Image

Image

Image

Image

Image


Many thanks to Steve, Eric Armpriester, and Linn Moedinger.

JAC


Offline
 Profile  
 
 Post subject: Don't miss these - Well worth a look
PostPosted: Fri Nov 09, 2007 10:40 am 

Joined: Wed Dec 14, 2005 11:28 am
Posts: 32
Location: Colorado
A great! series of shots, John. Thanks to all involved (there was obviously some serious thought and effort here) for putting 'em together.

But...

You really should've started a new thread with this. It looked like a software glitch'd pushed an old thread to the top, and I almost moved on before noting the addition at the end. Glad I didn't.

Scott


Offline
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 27 posts ]  Go to page 1, 2  Next

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: