| Railway Preservation News https://www.rypn.org/forums/ |
|
| AirBrake Gaskets https://www.rypn.org/forums/viewtopic.php?f=1&t=24862 |
Page 1 of 1 |
| Author: | Bobk [ Sun Feb 24, 2008 2:46 pm ] |
| Post subject: | AirBrake Gaskets |
What type of material is currently being used when hand cutting airbrake portion gaskets? Some of these gaskets are no longer available and must be hand fabricated. Also some of the air oil products will attack different rubber and synthetic materials. When using hand cut gaskets the material must be somewhat thicker for a good crush and seal. The original gaskets have ribs formed for this seal. |
|
| Author: | David Johnston [ Sun Feb 24, 2008 3:59 pm ] |
| Post subject: | Re: AirBrake Gaskets |
For air brake gaskets you can use thiokol treated leather. This is what they were made from befor WABCO switched to rubber. For more information about leather air brake gaskets contact Dave Utzinger, C. W. Marsh Co., Muskegon, MI, 231-722-3781. |
|
| Author: | Bobk [ Mon Feb 25, 2008 12:31 pm ] |
| Post subject: | Wrong number? |
This doesn't seem to be a working phone number. |
|
| Author: | David Johnston [ Mon Feb 25, 2008 1:56 pm ] |
| Post subject: | Re: Wrong number? |
Just tried phone number and got Dave Utzinger. You can also try 800-903-9426 or web site at www.cwmarsh.com. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|