| Railway Preservation News https://www.rypn.org/forums/ |
|
| C&S caboose blueprints https://www.rypn.org/forums/viewtopic.php?f=1&t=25734 |
Page 1 of 1 |
| Author: | dlloyd86 [ Thu Aug 07, 2008 10:57 pm ] |
| Post subject: | C&S caboose blueprints |
Hi, I am trying to spearhead a project to restore an old C&S wooden caboose. I was wondering if anyone would know where I could find some blueprints or design sketches to help me with the rebuild. |
|
| Author: | caboose9 [ Fri Aug 08, 2008 12:46 am ] |
| Post subject: | Re: C&S caboose blueprints |
d, I would contact the Colorado RR Museum to see what they might have available - info@ColoradoRAILROADMuseum.org. What C&S caboose are you planning to rehab? Roger |
|
| Author: | dlloyd86 [ Fri Aug 08, 2008 10:32 am ] |
| Post subject: | Re: C&S caboose blueprints |
I believe it's old number was 10593. I work for the Heber Valley Railroad and this caboose came to us with G&W locomotive 75. I just wanted to help and decided to spearhead the caboose project. Here is a picture. http://cencalrails.railfan.net/c&s10593 ... yUtsrk.jpg This caboose was in service until a couple years ago and then was taken out due to rotten end sills. In the mean time someone came and removed the old paint with a metal grinder leaving scars and so it will be reskined as well. I hope that is all, but who knows what we will find when we start getting into it. -Devin |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|
