Railway Preservation News
https://www.rypn.org/forums/

Santa Fe tech literature
https://www.rypn.org/forums/viewtopic.php?f=1&t=2654
Page 1 of 1

Author:  BobK [ Thu Feb 07, 2002 1:56 pm ]
Post subject:  Santa Fe tech literature

Does anyone know where or which museum, technical society or university library would have an extensive collection of Santa Fe steam literature.
I would like to find technical, blueprints, correspondence and specifications from Santa Fe's steam era.

robert@trainorders.com

Author:  ESinclair [ Thu Feb 07, 2002 2:35 pm ]
Post subject:  Re: Santa Fe tech literature

The book "Iron Horses of the Santa Fe Trail" by Worley is a pretty good place to start. Saw one on e-bay last week.

edsinclair@telmarnt.com

Author:  HKA [ Thu Feb 07, 2002 5:42 pm ]
Post subject:  Re: Santa Fe tech literature

> Does anyone know where or which museum,
> technical society or university library
> would have an extensive collection of Santa
> Fe steam literature.
> I would like to find technical, blueprints,
> correspondence and specifications from Santa
> Fe's steam era.

The combined standard practice CD that the Engineering Standards Committee, a.k.a. the "Gods of Steam", is producing has the Santa Fe standard practice on it. No word on when it will be out, though.

Author:  BobK [ Thu Feb 07, 2002 6:15 pm ]
Post subject:  Re: Santa Fe tech literature

> The combined standard practice CD that the
> Engineering Standards Committee, a.k.a. the
> "Gods of Steam", is producing has
> the Santa Fe standard practice on it. No
> word on when it will be out, though.

I think you are refering to the Santa Fe steam folio, I have that as well as the Santa Fe welding folio. Not quite what I was looking for. I was hoping that there was a repository for Santa Fe drawings etc. somewhere that I could dig through for research.

robert@trainorders.com

Author:  Dennis Hogan [ Fri Feb 08, 2002 1:00 am ]
Post subject:  Re: Santa Fe tech literature

In the last 10 years, some fellow out of Iowa or Kansas, I believe, published a scrapbook on Santa Fe steam locomotives based on actual shop records, drawings, etc. I saw the book at Milepost 1, the former R&LHS bookstore near the California State Railroad Museum, in the early 1990's. Never got a copy, unfortunately. Maybe someone will recall the work's name and the author and recommend where to find a copy.
Perhaps the title was something like "The Santa Fe Steam (or Shopman's) Scrapbook." It was a thick, ring-bound book.
*****
> Does anyone know where or which museum,
> technical society or university library
> would have an extensive collection of Santa
> Fe steam literature.
> I would like to find technical, blueprints,
> correspondence and specifications from Santa
> Fe's steam era.


denmeg_hogan@msn.com

Author:  Finderskeepers [ Fri Feb 08, 2002 11:23 am ]
Post subject:  Re: Santa Fe tech literature

Don't forget to get a copy of "Santa Fe's Big Three" by S.Kip Farrington, a very in depth technical analysis of the 4-6-4, 4-8-4 and 2-10-4 engines that ATSF had.

b.hume@rogers.com

Author:  J. David [ Fri Feb 08, 2002 12:10 pm ]
Post subject:  Re: Santa Fe tech literature

> The California State Railroad Museum and/or the R&LHS library there has some correspondance regarding the 2900s' and 5000s' as well as shopping records for same.
J. David

jdconrad@snet.net

Author:  Brian Norden [ Sat Feb 09, 2002 12:37 am ]
Post subject:  Re: Santa Fe tech literature

> Does anyone know where or which museum,
> technical society or university library
> would have an extensive collection of Santa
> Fe steam literature.
> I would like to find technical, blueprints,
> correspondence and specifications from Santa
> Fe's steam era.

Have you asked this question to the Santa Fe Railway Historical Society. In the past the Society has had a library collection in space subbed from San Diego RR Museum in the old express room of the San Diego depot. Check the society's web site http://www.atsfrr.com

Also the Kansas State Historical Society got many corporate records of the Santa Fe. See this web page: http://www.kshs.org/places/chr.htm

California State RR Museum was given many Santa Fe drawings from Topeka. See this web page: http://www.csrmf.org/doc.asp?id=122

Brian Norden

bnorden49@earthlink.net

Page 1 of 1 All times are UTC - 5 hours [ DST ]
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group
http://www.phpbb.com/