| Railway Preservation News https://www.rypn.org/forums/ |
|
| Want for a 23-25-44-45 GE with Cummins HMI 600 @ GE733 motor https://www.rypn.org/forums/viewtopic.php?f=1&t=27173 |
Page 1 of 1 |
| Author: | Owen S. Paulsen [ Tue Mar 10, 2009 2:12 pm ] |
| Post subject: | Want for a 23-25-44-45 GE with Cummins HMI 600 @ GE733 motor |
Want the overhaul for the Single Disc pump/distributor. For the GE 733 Motor We need the portion the allow us the remove Armature from outside of unit a take off the on the Armature so we can place in Lathe the turn the commutator. http://www.sdrm.org/roster/diesel/d-7485/index.html |
|
| Author: | Owen S. Paulsen [ Tue Mar 10, 2009 2:45 pm ] |
| Post subject: | Re: Want for a 23-25-44-45 GE with Cummins HMI 600 @ GE733 motor |
We need the tool(s) for dissemble the Armature so the 400 lbs can be place in a Lathe a have the Commutator turn. We have the Draw of Tool but it would be easier to borrow the tool(s) Stan |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|