It is currently Mon Aug 24, 2026 5:44 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 3 posts ] 
Author Message
 Post subject: Lima diesels
PostPosted: Wed Jul 29, 2009 9:21 pm 

Joined: Tue May 03, 2005 8:35 pm
Posts: 298
How many Lima diesels currently survive ? I know there are two at the Whitewater Valley RR in Connersville, IN and one at the IRM. Any others ?

Kevin Kohls


Offline
 Profile  
 
 Post subject: Re: Lima diesels
PostPosted: Mon Aug 03, 2009 4:59 pm 

Joined: Wed Aug 25, 2004 10:46 pm
Posts: 149
There are actually three at the WVRR. ex CUT 25, ex ARMCO 709, and ex B&O 320.

The 25 is operable. I had the 709 running a few years ago. It is close to operable, and hope to work on it soon now that I am back in the area. The 320 has issues, and has not operated since it left ARMCO steel. It could run again, but would need serious engine work.


My understanding is that the three at the WVRR, and the one at IRM are all that is left. There were two more that didn't make it through the last few years.

Ryan


Offline
 Profile  
 
 Post subject: Re: Lima diesels
PostPosted: Tue Aug 04, 2009 7:21 am 

Joined: Tue Dec 18, 2007 10:15 pm
Posts: 98
Location: eastern PA
I believe WVRR also owns the CUT #22 which needs to be moved from another location.

_________________
"As veteran B&LE engineer 'Tex' McCann observed, if Pennsylvania had a drawbar on it, a Bessemer 400 (DRS6-6-1500) would surely try to 'shake and wiggle' it."


Offline
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 3 posts ] 

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: