It is currently Fri Aug 28, 2026 5:55 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 8 posts ] 
Author Message
 Post subject: Painting Of 6167 Has Commenced
PostPosted: Thu Aug 27, 2009 9:52 pm 

Joined: Sun Jun 17, 2007 8:03 pm
Posts: 1115
Location: Warszawa, Polska
As of last week, the painting of 6167 has begun. Photos and other info can be found here.

_________________
CNR 6167 in Guelph, ON or "How NOT To Restore A Steam Locomotive"


Last edited by joe6167 on Sat Jul 31, 2010 7:18 pm, edited 1 time in total.

Offline
 Profile  
 
 Post subject: Re: Painting Of 6167 Has Commenced
PostPosted: Fri Aug 28, 2009 12:31 am 

Joined: Tue Aug 24, 2004 6:30 am
Posts: 773
I hope the paint sticks. It was sandblasted a month ago and left bare that entire time. I'm sure the rust started to set in. Ideally it should have been primed within hours of sandblasting completion.


Offline
 Profile  
 
 Post subject: Re: Painting Of 6167 Has Commenced
PostPosted: Fri Aug 28, 2009 1:11 am 

Joined: Sun Jun 17, 2007 8:03 pm
Posts: 1115
Location: Warszawa, Polska
We'll see (I hope so). Now I know that the cleanup of the engine took weeks, and I've been told that the high humidity that followed the sand blasting was not ideal for the application of paint.

_________________
CNR 6167 in Guelph, ON or "How NOT To Restore A Steam Locomotive"


Offline
 Profile  
 
 Post subject: Re: Painting Of 6167 Has Commenced
PostPosted: Fri Aug 28, 2009 7:03 am 

Joined: Sun Aug 22, 2004 8:50 am
Posts: 489
Location: Columbia, MD
I'm sure the rust started to set in. Ideally it should have been primed within hours of sandblasting completion.[/quote]

Hopefully the fact that she is under that tent will have kept the rust away.


Offline
 Profile  
 
 Post subject: Re: Painting Of 6167 Has Commenced
PostPosted: Fri Aug 28, 2009 8:31 am 

Joined: Tue Aug 24, 2004 6:30 am
Posts: 773
Kevin Gillespie wrote:
Hopefully the fact that she is under that tent will have kept the rust away.

It gets quite hot and humid here in Southern Ontario during the summer. Although it has been unusually cool and dry this year, we had a stretch two or three weeks ago of humidity. It will rust under humid conditions.


Offline
 Profile  
 
 Post subject: Re: Painting Of 6167 Has Commenced
PostPosted: Fri Aug 28, 2009 11:00 am 

Joined: Sun Aug 22, 2004 11:26 am
Posts: 4773
Location: Maine
Primer coat makes her look really good! Almost good enough to.... Aw, never mind.

Please entreat the city of build a shelter for the locomotive so your hard work and expenses won't have gone to waste.

_________________
"It's only impossible until it's done." -Nelson Mandela


Offline
 Profile  
 
 Post subject: Re: Painting Of 6167 Has Commenced
PostPosted: Fri Aug 28, 2009 6:42 pm 

Joined: Sun Jun 17, 2007 8:03 pm
Posts: 1115
Location: Warszawa, Polska
Like any lame soap opera, it never ends, see for the past few years, Guelph has been wanting to redevelop the bus station that is next to the locomotive, and apparently the plans include building a road right where the locomotive rests. So it may one day have to be moved, however we have tried passing on the suggestion that the new station incorporates the locomotive, preferably inside the station. Only time will tell...

_________________
CNR 6167 in Guelph, ON or "How NOT To Restore A Steam Locomotive"


Offline
 Profile  
 
 Post subject: Re: Painting Of 6167 Has Commenced
PostPosted: Fri Aug 28, 2009 10:48 pm 

Joined: Sun Aug 22, 2004 5:58 pm
Posts: 1083
[quote="Richard Glueck"]Primer coat makes her look really good! Almost good enough to.... Aw, never mind.

quote]



yes she does.............can't wait to see more.


Offline
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 8 posts ] 

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Search for:
Jump to: