| Railway Preservation News https://www.rypn.org/forums/ |
|
| Does anyone have or need 4-1/4" x 8" journal brasses? https://www.rypn.org/forums/viewtopic.php?f=1&t=29184 |
Page 1 of 2 |
| Author: | Kelly Anderson [ Wed Apr 07, 2010 2:31 pm ] |
| Post subject: | Does anyone have or need 4-1/4" x 8" journal brasses? |
. |
|
| Author: | Bob Davis [ Wed Apr 07, 2010 2:46 pm ] |
| Post subject: | Re: Does anyone have or need 4-1/4" x 8" journal brasses? |
I checked one of my Pacific Electric books, and found that this size is fairly common in streetcars, but there was no indication of whether trolley cars use "steeple back" or some other configuration. |
|
| Author: | Randy Hees [ Wed Apr 07, 2010 4:52 pm ] |
| Post subject: | Re: Does anyone have or need 4-1/4" x 8" journal brasses? |
At Ardenwood we use 2 3/4" x 4" (ten ton) and 3 1/2" x 6" (15 ton) both old style without a wedge. We have patterns for both We have a couple of later West Side Lumber Co. cars with 3 1/2" x 6" with a wedge but haven't made a pattern for those... Does anyone know if you can cast a wedge out of cast iron, or does it have to be steel? |
|
| Author: | eze240 [ Wed Apr 07, 2010 5:07 pm ] |
| Post subject: | Re: Does anyone have or need 4-1/4" x 8" journal brasses? |
you might check with the guys at georgetown loop, before last season they redid the babbit on a number of brasses, various sizes close to what you're talking about..... They may have a spare or two by now and I do believe some of those journals used brass wedges....... The wedge is the thing that sits between the brass and the top of the journal box right?..... |
|
| Author: | Kirk Warner [ Wed Apr 07, 2010 6:14 pm ] |
| Post subject: | Re: Does anyone have or need 4-1/4" x 8" journal brasses? |
This is a very common size for caboose journals. Almost all of the cabooses at the IRM use this size of bearing. |
|
| Author: | Stationary Steam [ Wed Apr 07, 2010 11:28 pm ] |
| Post subject: | Re: Does anyone have or need 4-1/4" x 8" journal brasses? |
I have two patterns for journal brasses, I think they are 4 1/4" x 8". Now where the heck did I last see them..... |
|
| Author: | Loco112 [ Thu Apr 08, 2010 1:01 am ] |
| Post subject: | Re: Does anyone have or need 4-1/4" x 8" journal brasses? |
Both the "Durango and Silverton" , the C&TS, WP&Y and the EBT use many plain bearings of that journal size. I'm not sure if they are steeple backed or other but, the journal size is common to the larger 3' gauge rollingstock. |
|
| Author: | David Johnston [ Thu Apr 08, 2010 11:22 pm ] |
| Post subject: | Re: Does anyone have or need 4-1/4" x 8" journal brasses? |
The Western Railway Musuem runs many cars with 4 1/4 X 8 plain journals and is presently in the market for two car sets of AAR A1 brass of this size. |
|
| Author: | Doug Debs 2472 [ Fri Apr 09, 2010 4:27 pm ] |
| Post subject: | Re: Does anyone have or need 4-1/4" x 8" journal brasses? |
I checked with mechanical dept. folks at Niles Canyon Railway. All of N.C.Ry. freight and passenger cars use 5x9 or larger journal brasses, so I cast a "no" vote in the poll. - Doug Debs P.S.: Also, Golden Gate Railroad Museum retrofitted all of their remaining plain-bearing heavyweight passenger cars (S.P. 5131 baggage-postal / tool car, S.P. 2979 lounge, three S.P. 80' "Harriman suburban" coaches) with roller bearings before moving them to Niles Canyon Railway. |
|
| Author: | Ryan Scott [ Sun Apr 11, 2010 1:09 am ] |
| Post subject: | Re: Does anyone have or need 4-1/4" x 8" journal brasses? |
Kelly The Whitewater Valley has a couple cabs with that size. Depending on the price we would be interested in some spares. Ryan |
|
| Author: | Gord [ Sun Apr 11, 2010 10:36 am ] |
| Post subject: | Re: Does anyone have or need 4-1/4" x 8" journal brasses? |
We have several cars that use 4-1/4" x 8" brasses. We'd be interested in a couple of sets, as well as wedges. Gord McOuat Halton County Radial Ry. |
|
| Author: | nasaracer32 [ Mon Apr 12, 2010 8:43 am ] |
| Post subject: | Re: Does anyone have or need 4-1/4" x 8" journal brasses? |
Hi Kelly, There may also be some interest for a couple of sets here at the New Hope Valley. Any idea on price....or does it keep betting lower with each 'yes'? :) |
|
| Author: | Howard P. [ Mon Apr 12, 2010 9:38 am ] |
| Post subject: | Re: Does anyone have or need 4-1/4" x 8" journal brasses? |
RMNE might be interested in some as well. Can you give some idea of what these would cost (each and in car sets)? Like many others, we have two cabooses (NYNH&H) that use this size. A few of our older wood passenger cars likewise have the same size brass. Thinking of the future, it might be prudent to have some brasses on hand. Howard P. |
|
| Author: | Kelly Anderson [ Mon Apr 12, 2010 2:41 pm ] |
| Post subject: | Re: Does anyone have or need 4-1/4" x 8" journal brasses? |
. |
|
| Author: | Randy Hees [ Fri Apr 16, 2010 9:53 am ] |
| Post subject: | Re: Does anyone have or need 4-1/4" x 8" journal brasses? |
In kicking around our collection it turns out we have at least two pair of trucks that use this size... both from Swayne Lumber / West Side Lumber Co. log cars from Seattle Car & Foundry. We need a few. |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|