Stopped by this week, thought I would share
| Railway Preservation News https://www.rypn.org/forums/ |
|
| Engine 3006 in 80th year https://www.rypn.org/forums/viewtopic.php?f=1&t=29859 |
Page 1 of 1 |
| Author: | Sloan [ Thu Jul 29, 2010 8:53 pm ] |
| Post subject: | Engine 3006 in 80th year |
http://www.galesburg.com/news/x10260429 ... -80th-year |
|
| Author: | Richard Glueck [ Fri Jul 30, 2010 8:51 am ] |
| Post subject: | Re: Engine 3006 in 80th year |
If nothing more, it raises the presence of the big Hudson to the public's eye. With some luck, somebody will write a check or two, and some little preservation will get done. Getting her under cover would be a good start. Good article. All park locomotives should be so blessed with a newspaper article. |
|
| Author: | GSpro [ Fri Jul 30, 2010 9:24 am ] |
| Post subject: | Re: Engine 3006 in 80th year |
Very interesting. 2-5 million dollars to restore? I'd sooner spend that on something bigger that will attract more people. But like all static displays, it does deserve a sand blasting and paint job, and a shelter to store it under. |
|
| Author: | Randy Hees [ Sat Jul 31, 2010 12:57 am ] |
| Post subject: | Re: Engine 3006 in 80th year |
In today's world $2.5 million for a restoration of big steam is not much... more like realistic... close to this total has been spend on several notable locomotives... with limited success... In a sense, for mainline steam, $2.5 million is the new $100,000... |
|
| Author: | Scott [ Sat Jul 31, 2010 1:44 am ] |
| Post subject: | Re: Engine 3006 in 80th year |
“This is cast aluminum and you can see, in 80 years, it’s turned to dust,” he said, pointing to an area below the engine. I'm so sorry. The S-4 class is one of my very favorite, even though I live on the left coast near Puget Sound. Please let me know which parts of a Q S-4 were cast aluminum. Have a good weekend all. |
|
| Author: | dinwitty [ Sat Jul 31, 2010 11:19 am ] |
| Post subject: | Re: Engine 3006 in 80th year |
not sure what would be aluminum, hopefully non-important replaceable, knowing the CB&Q and silver engines.... thats a very good article, those guys know their stuff and will inform well. |
|
| Author: | Unseenthings [ Thu Dec 02, 2010 1:38 pm ] |
| Post subject: | Re: Engine 3006 in 80th year |
Stopped by this week, thought I would share
|
|
| Author: | Dave Lewandoski [ Thu Dec 02, 2010 7:31 pm ] |
| Post subject: | Re: Engine 3006 in 80th year |
thanks for the pics |
|
| Author: | robertjohndavis [ Thu Dec 02, 2010 8:42 pm ] |
| Post subject: | Re: Engine 3006 in 80th year |
Wow, looking at the pictures it appears much of the jacketing was aluminum. It has turned to dust and fallen away. ;-) Rob |
|
| Author: | Richard Glueck [ Thu Dec 02, 2010 9:55 pm ] |
| Post subject: | Re: Engine 3006 in 80th year |
Fine looking specimen, and they even got a watering column with her. Thanks for the recent picture updates. |
|
| Author: | Mike Swanson [ Fri Dec 03, 2010 12:00 am ] |
| Post subject: | Re: Engine 3006 in 80th year |
GSpro wrote: Very interesting. 2-5 million dollars to restore? I'd sooner spend that on something bigger that will attract more people. But like all static displays, it does deserve a sand blasting and paint job, and a shelter to store it under. Keep in mind that he was talking about an operational restoration; a cosmetic restoration would cost quite a bit less than that unless the locomotive truly was "falling apart", which doesn't seem to be the case here (unless there's hidden damage to the frame, boiler, running gear, or tender, which is quite possible). At least the city had the good sense to remove the asbestos insulation from the boiler, steam appliances, and plumbing not too long after 3006 went on display; that alone has reduced much of the deterioration that far too many "park" locomotives suffer due to moisture being trapped by the insulation. That paint's in decent shape, too, and it looks like the city or some volunteers have done a good job of keeping it that way; still, stripping and repainting would be a good idea, and so too would be some sort of shelter. |
|
| Author: | J.David [ Fri Dec 03, 2010 10:33 am ] |
| Post subject: | Re: Engine 3006 in 80th year |
Ah memories... Removing the jacket and insulation from the 3006 and needle chipping the boiler and firebox was the first contract job I had working on steam locomotives... 1973 I believe. J.David |
|
| Author: | robertjohndavis [ Fri Dec 03, 2010 11:18 am ] |
| Post subject: | Re: Engine 3006 in 80th year |
J.David wrote: Ah memories... Removing the jacket and insulation from the 3006 and needle chipping the boiler and firebox was the first contract job I had working on steam locomotives... 1973 I believe. J.David You mean it wasn't cast aluminum that flaked off? ;-) Rob |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|