| Railway Preservation News https://www.rypn.org/forums/ |
|
| Rubber Moulding for Diesel Cab Windows https://www.rypn.org/forums/viewtopic.php?f=1&t=29861 |
Page 1 of 1 |
| Author: | Richard W. [ Fri Jul 30, 2010 1:09 pm ] |
| Post subject: | Rubber Moulding for Diesel Cab Windows |
The Northwest Railway Museum is in the process of repainting our 1951 Fairbanks-Morse H12-44 Switcher, Weyerhaeuser Timber #1. We have removed the windows and all of the rubber mounts have failed. These are single glazed aluminum frames that are screwed to the cab with a unique rubber mount for the glass. These frames appear to be similar to the windows used in later steel cabooses. Does anyone have a source for this rubber? I have contacted Adlake but have gotten no reply. Thanks, Richard Wilkens Northwest Railway Museum |
|
| Author: | atsfm177 [ Fri Jul 30, 2010 1:35 pm ] |
| Post subject: | Re: Rubber Moulding for Diesel Cab Windows |
I have been successful in getting window mouldings from C.R. Laurence Co from their Los Angeles warehouse. http://www.crlaurence.com/default.aspx I also have a fancy brochure I picked up at a AREMA conference a few years ago from http://www.lauren.com/ Greg |
|
| Author: | John E. Rimmasch [ Fri Jul 30, 2010 5:39 pm ] |
| Post subject: | Re: Rubber Moulding for Diesel Cab Windows |
Wasatch Railroad Contractors in Cheyenne, WY can provide the seals. We are doing a very large window project on a very exclusive and high quality passenger train set based in Denver. We have the ability to produce any seal that is needed. e-mail me direct if you like; jrimmasch@wrrc.us Happy to help! |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|