| Railway Preservation News https://www.rypn.org/forums/ |
|
| Sharon Coupler Knuckle Reproductions https://www.rypn.org/forums/viewtopic.php?f=1&t=3021 |
Page 1 of 1 |
| Author: | Rick [ Wed Apr 17, 2002 10:39 pm ] |
| Post subject: | Sharon Coupler Knuckle Reproductions |
I am prepared to have cast some Sharon coupler knuckles and throwers. If anyone is in need of Sharon knuckles, please let me know. This may be a one time deal, so if you have cars with Sharon couplers this is the time to get spare knuckles. Also I have a Pitt type knuckle if someone needs one of those. The Tod Engine todengine@woh.rr.com |
|
| Author: | L Beckman [ Thu Apr 18, 2002 7:20 pm ] |
| Post subject: | Re: Sharon Coupler Knuckle Reproductions |
> I am prepared to have cast some Sharon > coupler knuckles and throwers. If anyone is > in need of Sharon knuckles, please let me > know. This may be a one time deal, so if you > have cars with Sharon couplers this is the > time to get spare knuckles. Also I have a > Pitt type knuckle if someone needs one of > those. Rick: Got any idea as to the approximate cost? Les Beckman (HVRM) midlandblb@cs.com |
|
| Author: | Rick [ Thu Apr 18, 2002 7:38 pm ] |
| Post subject: | Re: Sharon Coupler Knuckle Reproductions |
> Rick: > Got any idea as to the approximate cost? > Les Beckman (HVRM) I plan to divide the cost of the pattern equipment over the number of knuckles that are produced. I estimate the cost around $100 each for a finished knuckle, but I don't have any solid figures available yet. I am investigating the cost difference between making equipment for cores for the knuckle pin vs. drilling the holes. We can cast the knuckles out of ductile iron or cast steel. The Tod Engine todengine@woh.rr.com |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|