| Railway Preservation News https://www.rypn.org/forums/ |
|
| RS4TC Traction Motors and Brushes https://www.rypn.org/forums/viewtopic.php?f=1&t=30266 |
Page 1 of 1 |
| Author: | Benjamin True [ Fri Oct 15, 2010 8:51 am ] |
| Post subject: | RS4TC Traction Motors and Brushes |
I am looking to find the any information on Traction Motors for a Baldwin RS4TC locomotive. I think they are Westinghouse, but I have looked all over them and can't find a data plate. The most critical need right now is for brushes but any information would be greatly appreciated. Thanks, Ben |
|
| Author: | Rob [ Fri Oct 15, 2010 9:07 am ] |
| Post subject: | Re: RS4TC Traction Motors and Brushes |
According to my book, they should be a Westinghouse 974-A motor. The brushes ar 3/4" x 1-1/2" x 2-1/4", p/n 1260218. This book is for the RS4TC that had been rebuilt with a Cat prime mover. Hope it helps. Rob |
|
| Author: | Richard W. [ Fri Oct 15, 2010 9:18 am ] |
| Post subject: | Re: RS4TC Traction Motors and Brushes |
They all have CAT diesels, as built they had D-397 V-12's. Here is a link to an online manual for the rebuilt RS-4-TC-1A http://www.militarynewbie.com/pubs/US%2 ... 223-12.pdf Richard Wilkens |
|
| Author: | museumops [ Fri Oct 15, 2010 12:21 pm ] |
| Post subject: | Re: RS4TC Traction Motors and Brushes |
I have had Electric Motor and Supply do work for me on traction motors and they should either be able to supply you with them or point you in the right direction. (814) 946-0401 and talk to Pat. |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|