| Railway Preservation News https://www.rypn.org/forums/ |
|
| WANTED: Narrow gauge axle drawings https://www.rypn.org/forums/viewtopic.php?f=1&t=31747 |
Page 1 of 1 |
| Author: | Brendan Zeigler [ Tue Jul 19, 2011 7:33 pm ] |
| Post subject: | WANTED: Narrow gauge axle drawings |
I am looking for drawings of 3' gauge car axles with 4x7 journals. Also, 4x7 journal boxes, bearings and bearing wedges would be helpful. Thanks in advance. |
|
| Author: | Randy Hees [ Tue Jul 19, 2011 8:50 pm ] |
| Post subject: | Re: WANTED: Narrow gauge axle drawings |
SPCRR has patterns for 3 1/2 x 6 or 6 5/8 journal box and bearing (depending on how it is measured) based on western narrow gauge practice... these are older, no wedge style. I have a axle drawing to match (somewhere probably in that pile over there....) There is an effort afoot here in the far west to make a 4x8 1/4 box and bearing patters set (with wedge) for some local restoration efforts. Randy |
|
| Page 1 of 1 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|