| Railway Preservation News https://www.rypn.org/forums/ |
|
| Trucking passenger cars, a look at a project I am working on https://www.rypn.org/forums/viewtopic.php?f=1&t=33029 |
Page 1 of 2 |
| Author: | JasonA [ Thu Mar 15, 2012 7:33 pm ] |
| Post subject: | Trucking passenger cars, a look at a project I am working on |
I have been involved with this project since the beginning, we ended up having to truck several passenger cars. I have been given permission to post these, but I will not fill in any info on the project. This car has already arrived at the end of it's over the road portion of the trip.          I have a video of the car leaving that I will post later. Jason |
|
| Author: | etalcos [ Thu Mar 15, 2012 9:24 pm ] |
| Post subject: | Re: Trucking passenger cars, a look at a project I am workin |
Looks like some equipment Ed Ellis bought at Carolina Southern, IMHO. The Waccamaw Coastline Purple on the old office car, and the Conway Depot (?) in the background tend to give it away. One would assume that Carolina Southern won't have bridge repairs made any time soon? |
|
| Author: | robertmacdowell [ Fri Mar 16, 2012 12:45 am ] |
| Post subject: | Re: Trucking passenger cars, a look at a project I am workin |
My God, either the car's made of neutronium or you've got a low-weight bridge to cross. Any idea why so many axles are being used? |
|
| Author: | JasonA [ Fri Mar 16, 2012 7:46 am ] |
| Post subject: | Re: Trucking passenger cars, a look at a project I am workin |
Car weighs 100K, I did not set up the truck, but I think it had something to do with some bridges they were going to have to cross between point A and B. |
|
| Author: | JimBoylan [ Fri Mar 16, 2012 8:59 am ] |
| Post subject: | Re: Trucking passenger cars, a look at a project I am workin |
Is the piping on the roof of the observation car for a Pennsylvania RR style train phone? |
|
| Author: | tomgears [ Fri Mar 16, 2012 9:18 am ] |
| Post subject: | Re: Trucking passenger cars, a look at a project I am workin |
That looks really expensive. |
|
| Author: | Alexander D. Mitchell IV [ Fri Mar 16, 2012 10:35 am ] |
| Post subject: | Re: Trucking passenger cars, a look at a project I am workin |
JimBoylan wrote: Is the piping on the roof of the observation car for a Pennsylvania RR style train phone? No, the car in question is a former Illinios Central observation car. See earlier thread: viewtopic.php?f=1&t=32955 The PRR Trainphone system used much thicker "pipes" set higher. I believe what we may be looking at on this car is nothing more than an old radio antenna for the lounge's radio. |
|
| Author: | wilkinsd [ Fri Mar 16, 2012 3:05 pm ] |
| Post subject: | Re: Trucking passenger cars, a look at a project I am workin |
JimBoylan wrote: Is the piping on the roof of the observation car for a Pennsylvania RR style train phone? Jim, It's the pintsch gas system for the car's lighting. (runs and hides) David |
|
| Author: | JimBoylan [ Fri Mar 16, 2012 3:14 pm ] |
| Post subject: | Re: Trucking passenger cars, a look at a project I am workin |
In the June, 1971 Amtrak wreck on the Illinois Central RR, some of the derailed passenger cars had propane gas cylinders. Maybe this was of the same type? |
|
| Author: | wilkinsd [ Fri Mar 16, 2012 11:23 pm ] |
| Post subject: | Re: Trucking passenger cars, a look at a project I am workin |
Jim, If the cars had Waukesha ice engines, or utilized propane for cooking (both of which were common in the pre-Amtrak era), it is entirely possible. David Wilkins Propane and Propane Accessories, MO |
|
| Author: | eze240 [ Sat Mar 17, 2012 10:17 am ] |
| Post subject: | Re: Trucking passenger cars, a look at a project I am workin |
Definitely the old radio antenna. Last time I saw the Calumet Club in Alamosa ('08-ish) it had a very similar one. Must have been common to IC cars? |
|
| Author: | fkrock [ Sat Mar 17, 2012 12:39 pm ] |
| Post subject: | Re: Trucking passenger cars, a look at a project I am workin |
That type of antenna was used commonly for AM broadcast antennas for lounge cars. I repaired one on a heavyweight Pullman lounge car (Western Pacific #653). The radio was one that operated on 32 volts DC that was sold to farmers who only had wind power on their farms. It used some unique 32 volt filament tubes. |
|
| Author: | Alexander D. Mitchell IV [ Mon Mar 26, 2012 2:05 pm ] |
| Post subject: | Re: Trucking passenger cars, a look at a project I am workin |
Intermediate stopover servicing point: the Lancaster & Chester RR: http://www.railpictures.net/viewphoto.php?id=393112 |
|
| Author: | robertmacdowell [ Mon Mar 26, 2012 3:59 pm ] |
| Post subject: | Re: Trucking passenger cars, a look at a project I am workin |
Alexander D. Mitchell IV wrote: Intermediate stopover servicing point: the Lancaster & Chester RR: http://www.railpictures.net/viewphoto.php?id=393112 zomg. You mean you're going to have to truck it a second time???? |
|
| Author: | Jeff Ramsey [ Mon Mar 26, 2012 7:56 pm ] |
| Post subject: | Re: Trucking passenger cars, a look at a project I am workin |
Is it not cheaper to jack up a carbody than to crane it? |
|
| Page 1 of 2 | All times are UTC - 5 hours [ DST ] |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|