It is currently Sun Sep 27, 2026 7:57 pm

All times are UTC - 5 hours [ DST ]




Post new topic Reply to topic  [ 7 posts ] 
Author Message
 Post subject: Elesco Feed Water Heater
PostPosted: Fri Apr 06, 2012 3:11 pm 

Joined: Sun Sep 24, 2006 2:47 pm
Posts: 83
Location: US of A
Amazing, the stuff that pops up and has survived all these years.

Anyone know of a spare Elesco, AND/OR the mounting brackets to hang it on a boiler front ?


Offline
 Profile  
 
 Post subject: Re: Elesco Feed Water Heater
PostPosted: Fri Apr 06, 2012 6:04 pm 

Joined: Sun Oct 19, 2008 12:58 pm
Posts: 1352
Location: Chicago USA
If it need not be functional maybe you can simulate one.

Steve


Offline
 Profile  
 
 Post subject: Re: Elesco Feed Water Heater
PostPosted: Sat Apr 07, 2012 2:29 am 

Joined: Sun Sep 24, 2006 2:47 pm
Posts: 83
Location: US of A
it does not need to function, just hang there and look good


Offline
 Profile  
 
 Post subject: Re: Elesco Feed Water Heater
PostPosted: Mon Apr 09, 2012 1:02 pm 

Joined: Fri Dec 02, 2011 11:18 am
Posts: 19
Location: Rossville, GA.
We removed the Elesco bundle from the front of Grand Trunk #6039 at Steamtown during our abatement work there last year to apply a new jacket. I have quite a few photos of the removed heater and the brackets from which you should be able to make up a cosmetic representation.


Offline
 Profile  
 
 Post subject: Re: Elesco Feed Water Heater
PostPosted: Mon Apr 09, 2012 1:16 pm 

Joined: Fri Dec 02, 2011 11:18 am
Posts: 19
Location: Rossville, GA.
Also - In the "Ones that got Away" department. In the 1980's at the C&O shops in Peru, Indiana there was an Elesco feedwater heater mounted on a cart and used for steam cleaning of diesels. It was down the ramp under the diesel dock . . . . . and not close to a door . . . . . . . . . and too heavy to pull up out of there . . . . . . and too heavy to load . . . . . . . . . and it was lost.
I wish I would have tried a lot harder to "preserve" that artifact!


Offline
 Profile  
 
 Post subject: Re: Elesco Feed Water Heater
PostPosted: Mon Apr 09, 2012 2:47 pm 

Joined: Tue Aug 02, 2005 1:25 pm
Posts: 6485
G. P. Bensman wrote:
Also - In the "Ones that got Away" department. In the 1980's at the C&O shops in Peru, Indiana there was an Elesco feedwater heater mounted on a cart and used for steam cleaning of diesels. It was down the ramp under the diesel dock . . . . . and not close to a door . . . . . . . . . and too heavy to pull up out of there . . . . . . and too heavy to load . . . . . . . . . and it was lost.
I wish I would have tried a lot harder to "preserve" that artifact!


Gary -

There was apparently other stuff lost from Peru, from what members of HVRM have told me, including some standpipes. Wish we had just one we could install at North Judson to "pose" Kanawha 2789 with; which was one thing that WAS saved from Peru.

Les


Offline
 Profile  
 
 Post subject: Re: Elesco Feed Water Heater
PostPosted: Tue Apr 10, 2012 8:17 am 

Joined: Fri Dec 02, 2011 11:18 am
Posts: 19
Location: Rossville, GA.
Les; Ohio Central was able to acquite many C&O standpipes. Maybe they have an extra that could help complete your display. Also; there was one successful artifact preservation from those Peru Shops - the famous "Peru Pump"! A fine 8-1/2"-120 cross compound that now serves on the Soo Line #1003.


Offline
 Profile  
 
Display posts from previous:  Sort by  
Post new topic Reply to topic  [ 7 posts ] 

All times are UTC - 5 hours [ DST ]


You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to: